JVC KS-FX725R service manual Removing the gear base arm / gear base link assembly See to

Removing the gear base arm / gear base link assembly (See Fig.27 to 29)

1.Move the gear base arm in the direction of the arrow.

2.Insert a slotted screwdriver to the gear base spring under the gear base arm, and release the gear base arm upward from the boss on the gear base assembly.

3.Remove the gear base arm from the main chassis while releasing the two joints v.

4.Move the gear base link assemby in the direction of the arrow to release the two joints w.

REFERENCE:When reattaching the gear base arm, make sure that the boss on the gear base assembly is inside the gear base spring.

KS-FX725R

Joint w	Gear base arm
	Joints v

Hook x

FFC pad

Hook x

Gear base	Joint w
link assembly
	Fig.27
Gear base spring

Gear base arm

Screwdriver

Removing the FFC pad

(See Fig.27 and 29)

1.Push each joint hook x of the FFC pad and remove toward the bottom.

Fig.28

Gear base link assembly

Gear base arm

FFC pad

Fig.29

1-13