JVC KW-AVX710 Listening to the satellite radio, For XM :, For XM Radio, For SIRIUS Radio, Turn on the power, 1Turn on the power, 1Turn on the power

ENGLISH

Listening to the satellite radio

Before operating, connect either one of the following (separately purchased) to the CD changer jack on the rear of this unit.

•JVC SIRIUS Satellite radio interface, KS-SRA 100, for listening to SIRIUS Satellite radio.

•JVC Smart Digital Adaptor, XMDJVC 100, for listening to XM Satellite radio.

For SIRIUS Radio

Activate your subscription after connection:

1Turn on the power.2Select “SAT” for the source.

• ☞also page 9.

The SIRIUS Satellite radio starts updating all the SIRIUS channels. (☞“GCI update” column below.)

•Once completed, SIRIUS Satellite radio tunes in to the preset channel, CH184.

3Check your SIRIUS ID, see page 51.

4Contact SIRIUS on the internet at <http:// activate.siriusradio.com/> to activate your subscription, or you can call SIRIUS toll-free at 1-888-539-SIRIUS (7474).

“Subscription Updated Press Any Key to Continue” appears on the monitor once subscription has been completed.

GCI (Global Control Information) update:

For XM Radio

Activate your subscription after connection:

• Only Channel 0, 1, and 247 are available before activation.

1Turn on the power.

2Select “SAT” for the source.

• ☞also page 9.

The XMDirectTM Universal Tuner Box starts updating all the XM channels. “Channel 1” is tuned in automatically. (☞“GCI update” column below.)

3Check your XM Satellite radio ID labelled on the casing of the XMDirectTM Universal Tuner

Box, or tune in to “Channel 0” (see page 37).

4Contact XM Satellite radio on the internet at <http://xmradio.com/activation/> to activate your subscription, or you can call 1- 800-XM-RADIO (1-800-967-2346).

Once completed, the unit tunes in to one of the available channels (Channel 4 or higher).

•If channels are updated after subscription, updating starts automatically, and no sound can be heard. For SIRIUS: “Channel is Updating XX% completed” appears.

For XM : “UPDATING” appears.

•Updating takes a few minutes to complete.

•Do not press any buttons or perform any operations until updating is completed.

36