ENGLISH

 

 

 

 

 

The procedure for setting an item is shown on page 47.

 

 

 

 

 

 

 

 

 

 

 

 

 

Menu items

Selectable settings, [reference page]

 

 

 

 

 

 

 

 

 

 

 

 

 

AV Input*1

You can determine the use of LINE IN and VIDEO IN terminals. ☞ [42, 43]

 

 

 

 

 

Off: Select when no component is connected (“AV-IN” is skipped while

 

 

 

 

 

selecting the source).

 

 

 

 

 

 

Audio&Video: Select when connecting an AV component such as a

 

 

 

 

 

VCR.

 

 

 

 

 

 

Audio: Select when connecting an audio component such as a portable

 

 

 

 

 

audio player.

 

Input

 

 

 

Camera*2 : Select when connecting a rear view camera.

 

 

 

 

 

 

 

 

 

 

 

 

Navigation : Select when connecting a Navigation System.

 

 

 

 

 

 

 

 

 

 

 

 

 

External Input*3

For connecting an external component to the CD changer jack on the

 

 

 

 

 

rear.

 

 

 

 

 

 

Changer/iPod*4: CD changer or iPod. ☞ [34, 40]

 

 

 

 

 

 

External: Any other than the above. ☞ [44]

 

 

 

 

 

 

• For connecting the Bluetooth adapter, this setting is not required. It is

 

 

 

 

 

automatically detected.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Beep

Off: Cancels.

 

 

 

 

 

 

On: Activates the key-touch tone.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Telephone Muting

Off: Cancels.

 

 

 

 

 

 

Muting1, Muting2: Select either one which mutes the sounds while

 

 

 

 

 

using the cellular phone.

 

Others

 

 

 

 

 

Power LED Flash

Off: Cancels.

 

 

On: When the ignition is turned off, the lamp on the

 

 

button

 

 

 

 

 

 

 

 

 

flashes.

 

 

 

 

 

 

 

 

 

 

 

 

 

TouchPanel Sens.

Change the sensitivity of the touch panel. As the number decreases,

 

 

 

 

 

sensitivity becomes higher. 1/2/3

 

 

 

 

 

 

 

 

 

 

 

 

 

Initialize

Initialize all settings you have made in <AV Menu>. Press and hold

 

 

 

 

 

[Enter] to initialize the settings, then reset the unit. ☞ [3]

 

 

 

 

 

 

 

 

*1

Not selectable when “AV-IN” is selected as the source.

 

*2

The REVERSE GEAR SIGNAL lead connection is required. See Installation/Connection Manual. The rear view through

 

 

the camera appears on the screen in <Full> aspect ratio (regardless of the aspect ratio setting) when you shift the

 

 

gear to the reverse (R) position. When you press DISP on the control panel, or when you shift the gear to another

 

 

position other than the reverse (R) position, the rear view screen is cleared.

 

*3

Not selectable when the component connected to the CD changer jack is selected as the source.

 

*4

The name of the component detected through the CD changer jack is shown.

 

52