Disc operations

The disc type is automatically detected, and playback starts automatically (for some discs: automatic start depends on its internal program).

If a disc does not have any disc menu, all tracks on it will be played repeatedly until you change the source or eject the disc.

If “” appears on the screen, the unit cannot accept the operation you have tried to do.

• In some cases, without showing “,” operations will not be accepted.

ENGLISH

~Open the monitor panel.

<Open/Tilt> menu is displayed.

•By pressing and holding the button, you can open the monitor panel and eject the disc.

ŸPress [OPEN].
!Insert a disc.

Label side

Monitor panel closes automatically.

If not, press [CLOSE].

Caution:

Do not place your finger behind the monitor panel.

Caution on volume setting:

Discs produce very little noise compared with other sources. Lower the volume before playing a disc to avoid damaging the speakers by the sudden increase of the output level.

When playing back a multi-channel encoded disc, the multi-channel signals are downmixed.

•You can fully enjoy multi-channel sound by connecting an amplifier or a decoder compatible with these multi-channel sources. (☞ also page 61)

13OPERATIONS