Sound signals emitted through the rear terminalsThrough the analog terminals (Speaker out/REAR OUT)

2-channel signal is emitted. When playing multi-channel encoded disc, multi-channel signals are downmixed.

• DTS sound cannot be reproduced.

Through the DIGITAL OUT terminal

Digital signals (Linear PCM, Dolby Digital, DTS, MPEG Audio) are emitted.

•To reproduce the multi-channel sounds such as Dolby Digital, DTS, and MPEG Audio, connect an amplifier or a decoder compatible with these multi-channel sources to this terminal, and set <D. Audio Output> correctly. (☞ page 51)

 

<D. Audio Output>

 

 

Output signals

 

 

Playback disc

<Stream>

 

<Dolby D>

 

<PCM>

 

 

 

 

 

 

DVD

48 kHz, 16/20/24 bits Linear PCM

48 kHz, 16 bits stereo Linear PCM*

 

 

96 kHz, Linear PCM

 

48 kHz, 16 bits stereo Linear PCM

 

 

 

 

 

 

 

 

with Dolby Digital

Dolby Digital bitstream

48 kHz, 16 bits stereo

 

 

Linear PCM

 

 

 

 

 

 

 

 

 

 

 

 

 

 

with DTS

 

 

DTS bitstream

 

 

 

 

 

 

 

 

 

with MPEG Audio

MPEG bitstream

 

48 kHz, 16 bits stereo Linear PCM

 

 

 

 

 

 

Audio CD, Video CD

44.1 kHz, 16 bits stereo Linear PCM /

 

 

48 kHz, 16 bits stereo Linear PCM

 

 

 

 

 

 

 

 

 

 

 

Audio CD with DTS

 

 

DTS bitstream

 

 

 

 

 

 

 

 

DivX/

with Dolby Digital

Dolby Digital bitstream

48 kHz, 16 bits stereo

 

Linear PCM

MPEG

 

 

 

 

 

 

 

 

 

 

 

with MPEG Audio

32/44.1/48 kHz, 16 bits Linear PCM

 

 

 

 

 

 

 

 

MP3/WMA

32/44.1/48 kHz, 16 bits Linear PCM

 

 

 

 

 

 

 

 

WAV

 

 

44.1 kHz, 16 bits Linear PCM

 

*Digital signals may be emitted at 20 or 24 bits (at their original bit rate) through the DIGITAL OUT terminal if the discs are not copy-protected.

ENGLISH

61REFERENCES