Setup
Initial setup (Continued)
4) Set TV attribute
1 Change settings
Set TV Attribute
Tuner Mode | Air |
Start Scan | Exit |
|
|
2 Select an item
3 Select “Start Scan”
4 Start scanning channels
Tuner Mode | Choose Air (antenna) or Cable |
*If you use a set top box (satellite or cable box), press “Exit” to skip this step.
Cable Users: After your auto tuner setup is complete, you may, (depending on the type of hookup), have only 1 channel, usually 2, 3 or 4 in the auto tuner memory. This is normal.
“Thank you! Setup is now complete”
17