Filename [XV48EK_09Editing.fm]
Masterpage:Left+
Page 46 November 18, 2004 10:44 pm
EDITING (VHS DECK) (cont.)
46
Dubbing (from DVD to VHS)
You can dub selected scenes from the DVD disc to a cassette,
starting and stopping wherever you wish.
However, it is not possible to dub copy-protected discs.
In such case, “ERROR” appears on the front display panel.
ALoad a cassette and place a disc.
For the VHS deck
Insert a cassette with the record safety tab intact.
For the DVD d eck
APress x on the DVD deck to open the disc tray.
BPlace the disc in the disc tray.
CPress x on the DVD deck to close the disc tray.
BPrepare the VHS deck for dubbing.
APress VCR.
BPress p to select recording speed.
CSearch for the point where you want to start dubbing
by pressing 4, 5 or 3 then press 8.
CPrepare the DVD deck for dubbing.
APress DVD.
BStart playback and search for the point where you
want to start dubbing by pressing 4, 5 or 3.
DStart dubbing.
A little before the dubbing start point, press and hold 7,
then press 4 on the remote control.
●“dub” lights on the front display panel.
EEnd dubbing.
Press 8.
●Be sure to press 8 while the VCR indicator lights up on the
unit.
●If you press 8 or x with the DVD deck selected, the dubbing
stopped, but the opening screen is also recorded.
●When you have finished dubbing, press DVD to select the
DVD deck and press 8 to stop playback.
NOTES:
●Set “ON SCREEN GUIDE” to “OFF” (墌pg.57) if you do not
want to record the on-screen display for DVD discs during
dubbing.
●There may be a discrepancy of several seconds between where
you intend editing to start, and where it actually starts.
●The superimposed indication during the operation or dubbing
is not recorded.
●Set “PICTURE CONTROL” to “EDIT.” (墌pg.53)
●Turn on the TV and select the video channel (or AV
mode).
●Slide the TV/VCR/DVD switch on the remote
control to the right.
Slide to the
right.
XV48EK_01.book Page 46 Thursday, November 18, 2004 10:45 PM