JVC LPT0991-001A manual Clock Set

65

Clock Set

●Turn on the TV and select the video channel (or AV mode).

●Slide the TV/VCR/DVD switch on the remote control to the right.

Slide to the right.

IMPORTANT

If you performed Auto Set Up ( pg. 12) or Preset Download ( pg. 13), without ever having set the clock previously, the unit’s built-in clock is also set automatically. Perform the following steps only if —

—Auto Clock Set has not been performed correctly by Auto Set Up or Preset Download.

OR

—you want to change the Just Clock setting. ( pg. 65, “Just Clock”)

A Turn on the unit.

Press 1.

B Select the VHS deck.

On the unit

Press VCR/DVD repeatedly so that the VCR indicator lights up.

On the remote control

Press VCR so that the VCR indicator lights up.

C Access the Main Menu screen.

Press SET UP.

D Access the Clock Set screen.

Press rt to move the highlight bar (pointer) to “CLOCK SET,” then press ENTER or e. The Clock Set screen appears.

E Set the date and time.

Press rt to set the time, then press ENTER or e. The “DATE” display begins blinking. Repeat the same procedure to set the date and year.

●When you set the time/date, press and hold rt to change the time by 30 minutes/15 days.

F Set Just Clock.

The default setting is “ON.” Set as desired by pressing rt, then press ENTER or e.

●For the Just Clock function, refer to “Just Clock” on page 65.

●If you set it “OFF,” press SET UP to finish the clock setting.

Just Clock

The Just Clock function provides accurate time keeping through automatic adjustments at regular intervals, by reading data from a PDC signal.

The Just Clock option can be set “ON” or “OFF” at the Clock Set screen (the default setting is “ON”). Press ENTER until the Just Clock setting begins blinking, then press rt to change the setting.

IMPORTANT: If you turn off Just Clock, the accuracy of the built-in clock may be reduced, which could adversely effect timer recording. We recommend you to set Just Clock on. In cases where the clock setting data from a PDC signal is incorrect, however, you are advised to set it “OFF.”

G Set the source channel position for clock data.

The unit is preset to receive clock setting and adjustment data from channel position 1.

Press rt to set the channel position to the number representing the station transmitting clock setting data, then press ENTER or e.

H Start the clock operation.

Press SET UP.

NOTES:

●Just Clock (when set to “ON”) adjusts the unit’s built-in clock every hour, except for 23:00, 0:00, 1:00 and 2:00.

●Just Clock is not effective when:

—the unit’s power is on.

—the unit is in the timer mode. (VHS deck only)

—a difference of more than 3 minutes exists between the built-in clock’s time and the actual time.

—the unit is in the Automatic Satellite Programme Recording mode. ( pg. 28) (VHS deck only)

—the unit is in the Power Save mode. ( pg. 54) (VHS deck only)

—“L-2 SELECT” is set to “SAT.” ( pg. 54) (VHS deck only)

●If Just Clock is set to “ON,” the unit’s clock is automatically adjusted at the start/end of Summer Time.

●Just Clock may not function properly depending on the reception condition.