24 | OPERATIONS ON VHS DECK (cont.) |
VIDEO Plus+® Timer Programming
With the VIDEO Plus+ system, timer programming is greatly simplified because each TV programme has a corresponding code number which your unit is able to recognize.
Before performing the VIDEO Plus+ Timer Programming:
●Make sure that the unit’s
●Insert a cassette with the safety tab in place. The unit will come on automatically.
●Turn on the TV and select the video channel (or AV mode).
●Slide the TV/VCR/DVD switch on the remote control to the right.
Slide to the right.
A Select the VHS deck.
On the unit
Press VCR/DVD repeatedly so that the VCR indicator lights up.
On the remote control
Press VCR so that the VCR indicator lights up.
B Access the VIDEO Plus+ screen.
C Enter the PlusCode number.
Press the number keys to enter the PlusCode number of a programme you wish to record.
●If you make a mistake, press & and input the correct number.
D Access the VIDEO Plus+ Program screen.
Press ENTER, then the VIDEO Plus+ Program screen appears (if you’re just starting out, “P1” appears).
IMPORTANT
Make sure the channel position number you wish to record is displayed; if not, or “TV PROG” shows “–
●If the number you entered is invalid, “ERROR” appears on the TV screen. Press & and input a valid PlusCode number.
E Set the tape speed.
Press p.
F Set the PDC mode.
Press PDC (number key “7”) to select “ON” or “OFF.”
●If “VPS/PDC ON” is displayed on the TV screen, “PDC” is set to “ON.”
●If “VPS/PDC OFF” is displayed on the TV screen, “PDC” is set
to “OFF.”
“PDC Recording” on page 25.
●VPS (Video Programme System) recording is not currently available in the U.K. and not possible with this unit.
Press PROG.