JVC LPT0991-001A manual Setting Station Names Manually

61

Changing Station Channel Position

Perform steps A and B of “Manual Channel Set” on page 60 to access the Confirmation screen before continuing.

A Select the item.

Press rt w e until the item you want to move begins blinking. Then press ENTER and the station name (ID) and its channel (CH) number begin blinking.

B Select the new position.

Press rt w e to move the station to the new channel position, then press ENTER.

Example: If you moved the station in position 4 to position 2, the stations originally in positions 2 and 3 each move down one space.

Setting Station Names Manually

You can set station names manually.

Perform steps A and B of “Manual Channel Set” on page 60 to access the Confirmation screen and then perform steps A and B of “Setting Station Names by ID Code” above before continuing.

A Select the character for station name.

Press e until the first letter of the station name begins blinking.

	B Enter the new character.
	Press rt to cycle through the characters (A–Z, 0–9, –,
	f, +, I (space) ) and stop when the desired character is
	indicated, then press e to enter. Enter the remaining
	characters the same way (maximum of 4). After entering
● Repeat steps A and B if necessary.	all characters, press ENTER.
C Close the Confirmation screen.	● The Confirmation screen appears.
	● If you make a mistake, press w until the incorrect character
	begins blinking. Then enter the correct character by pressing
Press SET UP.	rt.

Setting Station Names by ID Code

Set station names by ID codes (“ID”) that are registered in your unit.

Perform steps A and B of “Manual Channel Set” on page 60 to access the Confirmation screen before continuing.

C Close the Confirmation screen.

Press SET UP.

NOTE:

The characters available for the station name (ID) are A–Z, 0–9, –, f, +, I (space) (maximum of 4).

A	Select the item.	Fine-Tuning a Stored Channel
Press rt w e until the item you want begins blinking.
		Perform steps A and B of “Manual Channel Set” on page 60
B Access the Manual Channel Set screen.		to access the Confirmation screen before continuing.
Press ENTER twice.		A Select the channel to fine-tune.
C
	Select the new station.	Press rt w e until the channel you want to tune begins
Press e until the station		blinking.
name (ID) begins blinking,		B Access the Manual Channel Set screen.
then press rt until the new
station’s name (ID) you want		Press ENTER twice. The Manual Channel Set screen
to store begins blinking.		appears.
Registered station names
( pg. 62) appear as you		C Perform tuning.
press rt.
		Press e until “+/–” begins blinking, then press rt to
D Switch the stations.		obtain the best picture quality. After finishing adjustment,
		press ENTER.
Press ENTER.		● The Confirmation screen appears.
● The Confirmation screen appears.		● Repeat steps A – C if necessary.
● Repeat steps A – D if necessary.
		D Close the Confirmation screen.
E Close the Confirmation screen.
		Press SET UP.
Press SET UP.