Mounting the Camera (continued)
Mounting
1 Align the shooting direction with the shooting direction mark (j), followed by mounting the camera
2 Fasten the camera (x3 locations)
ATurn the tip of the ceiling mounting bracket such as by using a screwdriver
BThe camera is fastened after the ceiling mounting brackets are hooked to the ceiling
Memo:
●To remove the camera, perform the above procedure in the reverse sequence.
Ceiling mounting bracket
(Sections that hook to the ceiling)
Ceiling mounting
Mounting with the cables pulled out from the side
When mounting the camera to the ceiling or wall, you can pull out the cables from the side without having to make a hole in the ceiling.
Memo:
●The basic mounting procedures are identical to those described for “Direct mounting to the ceiling/horizontal mounting to the wall”.
●For details on mounting, please refer to the [READ ME FIRST] (sheet) provided.
1Break the portion illustrated by the dotted lines in the diagram such as by using a pair of radio pliers
Break
2 Mount the outer casing to the ceiling
1 
2
T | PU |
NO | |
| FR |
Align with
shooting direction
Image Adjustment
bracket (tip)
or wall
3 Pull out the cables from the cable outlet
4 Connect the cables
After mounting is complete, adjust the video image while referring to the actual display on the monitor.
(A [READ ME FIRST])
Mounting the Dome Cover
After video image adjustment is complete, mount the inner dome and dome cover accordingly. Installation is complete after the dome cover is mounted and the protective sheet removed.
(A [READ ME FIRST])
12