Analog signal output (for installation)

This camera is equipped with an analog video monitor signal output terminal, which is used for adjusting the camera angle during installation.

Saving JPEG images to the FTP server at regular intervals

JPEG images may be uploaded to the FTP server at regular intervals.

Alarm input/output

This camera comes with a motion detection feature and dual alarm input.

During motion detection or alarm input, actions such as mail delivery, message transmission via TCP/UDP, alarm output, or a combination of any two actions can be triggered.

Installing an FTP server enables uploading of images before and after the alarm input time (pre-/post-recording) to the server.

Fine focus adjust

This feature eases fine-tuning of the focus, and enables focus to be accurately adjusted speedily.

How to read this INSTRUCTIONS (Installation)

Symbols used in this manual

Note

:States precautions to be taken

 

during operation.

Memo

:States restrictions on the functions

 

or use of this equipment. For

 

reference purposes.

A:Indicates the page numbers or items to refer to.

Contents of this manual

●JVC holds the copyright to this manual. Any part or all of this manual may not be reproduced without prior consent from the company.

●Windows is a registered trademark of Microsoft Corporation in the U.S.

●Product names of other companies described in this manual are trademarks or registered trademarks of the respective companies. Symbols such as ,  and  are omitted in this manual.

●Design, specifications and other contents described in this manual are subject to change for improvements without prior notice.

3