V Status indicator
Indicates the current status of the camera.
Starting up: Lights up in orange
After startup is complete : Lights up in green
Error | : Blinks in orange |
Memo:
●When the camera is in the focus adjust mode, the status indicator blinks in green and orange alternately.
●The indicator light after startup can be set to off or blink in green using the [LED State] of the integrated viewer. To alter the settings of the LED indicator, refer to [INSTRUCTIONS (Setting)].
W [MONITOR OUT] selection switch
Use this switch to select whether to send output from the [MONITOR] terminal T, and also the corresponding signal format.
[N]: Select this when connecting to an
[OFF] : Disables output. Select this setting when sending images to the network.
[P]: Select this when connecting to a PAL-
compatible monitor. [Default setting : AOFFB]
Note:
●Images are not sent to the network when this is set to ANB or APB.
●When the switch setting is altered, press the [RESET] button for less than 2 seconds to reboot the camera.
X Rotation control
Adjusts the inclination of the image by rotating the lens unit with the center of the lens as the axis.
(A [READ ME FIRST])
Note:
●Do not hold the lens section when adjusting the camera direction. The lens section may be damaged if you apply force to it.
Y [FOCUS ADJ] fine focus adjust
This is used to focus the lens. (A [READ ME FIRST])
9