Precautions
Storage and Operating Environment
This product is an indoor camera. It cannot be used outdoors.
Do not store in the following environments. It might result in malfunctions or failure.
●Hot or cold locations beyond the allowable operating temperature range of
●Locations beyond the allowable operating humidity range of 35 % RH to 90 % RH (condensation is not allowed)
●Near equipment that emits strong magnetic fields, such as transformers or motors
●Near equipment that emits radio waves, such as transceivers and mobile phones
●Locations with excessive dust and sand
●Locations that are subject to strong vibrations
●Locations prone to moisture such as window side
●Locations that are subject to steam or oil, such as kitchens
●Locations that are subject to emission of radiation,
Use of this product and cables connected to this product at locations where strong electric waves and magnetic waves are generated (e.g., near radio, TV, transformer, monitor, etc.) may cause noise interferences in the images or changes in the color.
Do not install this camera at a location that is directly subject to cold air, or near the discharge outlet of an
Do not install this camera at a location that traps heat
This product also discharges heat from the surface of the main unit. Do not install it at locations that may trap heat, such as the corner of a wall.
Handling Precautions
Do not block the vents
Inadequate heat ventilation may result in malfunction of this product. Be sure not to block the vents around the product.
Copyright Protection
With the exception of the user being the copyright holder or when permission such as for duplication has been granted by the copyright holder, permission is required in principle for the duplication, modification, or transmission of copyrighted video and audio data.
Unauthorized duplication, modification, or transmission of copyrighted material may constitute a copyright infringement, and the user may be liable to compensate for any damages. When using copyrighted video/ audio data, be sure to check the license agreement of the copyrighted material thoroughly.
When rights or rights holders are involved with regard to the targeted duplicating subject, permission may be required for shooting or using (processing) it. Be sure to check the licensing conditions thoroughly.
Disclaimer
The motion detection feature is not a feature to prevent theft or fire. Our company shall not be liable for any loss or damage resulting from the use of this feature.
We shall not be responsible for any loss or damage caused in the event of privacy invasion as a result of the camera footages of this product.
Maintenance
Turn off the power before performing maintenance.
Wipe using a soft cloth.
Wiping with thinner or benzene may melt or tarnish its surface. For tough stains, wipe using a cloth that is dipped into a neutral detergent diluted with water, followed by wiping with a dry cloth.
Saving Energy
If the camera is not to be used for a long time, turn off the power of the system for safety and energy conservation reasons.
4