EN 73

1 2

4

3

6

80

!

@

7

5

9

CONTROLS, INDICATIONS AND CONNECTORS
Camcorder
8Jack cover (Z pg. 54)
Pull this out to detach.
9Hand strap eyelet (Z pg. 14)
Slide the strap through the eyelet.
0External microphone input jack (MIC)
(Stereo) (Z pg. 65)
An optional microphone can be connected.
!Video/audio output jack or headphones
jack ( /AV-OUT) (Z pg. 54, 65)
The provided VIDEO/AUDIO cable (ΓΈ3.5) can
be connected to a television etc. Using optional
headphones, you can listen to the sound.
However, headphones equipped with volume
control cannot be used.
@DC input jack (DC-IN) (Z pg. 10)
The DC cord of an AC Power Adapter or Power
Pack can be connected.
1Cassette cover (Z pg. 12)
Cassette is loaded inside the cover.
2Stereo microphone (Z pg. 65)
For use when recording or audio dubbing.
3White balance sensor
Adjusts the colour reproduction. Take care not to
cover the sensor with your hand while shooting.
4Lens cover
Opens when the viewfinder is pulled out or the
LCD monitor is opened fully.
5Remote sensor (Z pg. 50)
Receives the signal from the remote control.
When using the remote control, point it at the
remote sensor.
6Tally lamp
Lights during recording.
7Flash (built-in sensor) (Z pg. 26)
During Snapshot recording, this senses the
brightness and flashes in a dark environments
with insufficient light. Take care not to cover the
sensor with your hand while shooting.