14 EN VIDEO PLAYBACK |
| |
MMENU/VOL. | Shuttle Search | |
BLANK SEARCH | Allows | |
| ||
| playback. | |
| 1) During playback, press 5 for forward search, or | |
| 3 for reverse search. | |
| 2) To resume normal playback, press 4/9. | |
| ● During playback, press and hold 5 or 3. The search | |
| continues as long as you hold the button. Once you release | |
| the button, normal playback resumes. | |
| ● A slight mosaic effect appears on the display during Shuttle | |
| Search. This is not a malfunction. | |
| ATTENTION: | |
| During Shuttle Search, parts of the | |
Power Switch | picture may not be clearly visible, | |
Lock Button | particularly on the left side of the | |
screen. | ||
VIDEO/MEMORY | ||
| ||
8 |
| |
4/9 | Blank Search | |
|
Helps you find where you should start recording in the middle of a tape to avoid time code interruption.
( pg. 13)
1 Load a cassette. ( pg. 10)
2 Set the VIDEO/MEMORY Switch to “VIDEO”.
3 Set the Power Switch to “PLAY” while pressing down the Lock Button located on the switch.
|
| 4 During Stop mode, press BLANK SEARCH. |
| 3 | ● The “BLANK SEARCH” indication appears and the |
| camcorder automatically starts reverse or forward search, | |
|
| |
Speaker | 5 | then stops at the spot which is about 3 seconds of tape |
|
|
before the beginning of the detected blank portion. ● To cancel Blank Search midway, press 8.
Normal Playback
1 Load a cassette. ( pg. 10)
2 Set the VIDEO/MEMORY Switch to “VIDEO”.
3 Set the Power Switch to “PLAY” while pressing down the Lock Button located on the switch.
4 To start playback, press 4/9.
5 To stop playback, press 8.
●During Stop mode, press 3 to rewind, or 5 to fast- forward the tape.
To control the speaker volume
Rotate the MMENU/VOL. Wheel towards “+” to turn up the volume, or towards
NOTES:
●The playback picture can be viewed in the LCD monitor, viewfinder or on a connected TV. ( pg. 17)
●For other notes, pg. 39.
Still Playback
Pauses during video playback.
1)Press 4/9 during playback.
2)To resume normal playback, press 4/9 again.
●If still playback continues for more than about 3 minutes, the camcorder’s Stop mode is automatically engaged.
●When 4/9 is pressed, the image may not pause immediately while the camcorder stabilizes the still image.
NOTES:
●Before starting Blank Search, if the current position is at a blank portion, the camcorder searches in the reverse direction. If the current position is at a recorded portion, the camcorder searches in the forward direction.
●Blank Search does not work if “USE CLEANING CASSETTE” has appeared with the tape.
●If the beginning or end of the tape is reached during Blank Search, the camcorder stops automatically.
●A blank portion which is shorter than 5 seconds of tape may not be detected.
●The detected blank portion may be located between recorded scenes. Before you start recording, make sure there is no recorded scene after the blank portion.
