36 EN EDITING
| Connection To A Personal Computer | [A] Using USB cable | ||||
| ||||||
|
|
| ||||
It is possible to do the following things: | ||||||
|
|
|
| |||
|
|
|
| |||
[A] Using USB cable | [B] Using DV cable | ● Transfer still images stored on a memory card to a PC. | ||||
● Transfer still/moving images recorded on a tape to a | ||||||
|
| OR |
| |||
|
|
|
|
| PC. | |
● Capture still/moving images in
[B] Using DV cable
It is also possible to transfer still/moving images to a PC with a DV connector by using the provided software, software equipped with the PC or commercially available software.
To USB
USB cable (provided)
To USB connector
PC
To DV IN/OUT
Core filter
DV cable (optional)
Core filter
To DV connector
PC with DV connector
NOTES:
●Refer to “SOFTWARE INSTALLATION AND USB CONNECTION GUIDE” for the installation of the bundled software and drivers.
●The software operation manual is provided as PDF file on the
●It is recommended to use the AC Adapter as the power supply instead of the battery pack. ( pg. 7)
●Never connect the USB cable and the DV cable simultaneously to the camcorder. Connect only the cable you wish to use to the camcorder.
●When using a DV cable, be sure to use the optional JVC
●If the PC connected to the camcorder via the USB cable is not powered, the camcorder does not enter the USB mode.
●The date/time information cannot be captured into the PC.
●Refer to the instruction manuals of the PC and Software.
●The still images can also be transferred to a PC with a DV
●The system may not work properly depending on the PC or capture board you are using.
“USB MODE” and/or “ACCESSING FILES” appears on the LCD monitor while the PC is accessing data in the camcorder or the camcorder is transferring a file to the PC.
NEVER disconnect the USB cable while “ACCESSING FILES” is displayed on the LCD monitor since this can result in product damage.
