|
|
|
|
|
|
|
| TROUBLESHOOTING | EN 43 |
Warning Indications |
|
|
|
| |||||
|
|
|
| ||||||
|
|
| A. DUB ERROR! | ||||||
|
|
|
|
|
|
|
| <CANNOT DUB ON A LP RECORDED TAPE> | |
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
| <CANNOT DUB ON A 16bit RECORDING> | |
|
|
|
|
|
|
|
| <CHECK TAPE’S ERASE PROTECTION TAB> | |
Displays the battery remaining power. |
|
| |||||||
|
|
| ● Appears if Audio Dubbing is attempted on a tape | ||||||
Remaining power level |
|
|
| ||||||
|
|
| recorded in the LP mode. ( pg. 37) | ||||||
|
|
|
|
|
|
|
| ||
High |
| Exhausted |
| ● Appears if Audio Dubbing is attempted on a tape | |||||
As the battery power comes close to nil, the battery |
| recorded in | |||||||
indicator blinks. |
|
|
| ● Appears if A. DUB (D) on the remote control is pressed | |||||
When the battery power is exhausted, power turns off |
| when the erase protection tab is set to “SAVE”. | |||||||
automatically. |
|
|
| ( pg. 37) | |||||
INSERT ERROR!
Appears when no tape is loaded. ( pg. 10)
CHECK TAPE’S ERASE PROTECTION TAB
Appears when the erase protection tab is set to “SAVE” while the Power Switch is set to “A” or “M” and the VIDEO/MEMORY Switch is set to “VIDEO”. ( pg. 8)
USE CLEANING CASSETTE
Appears if dirt is detected on the heads during recording. Use an optional cleaning cassette. ( pg. 46)
CONDENSATION, OPERATION PAUSED 
PLEASE WAIT
Appears if condensation occurs. (The two indications above swiches alternately every 3 seconds.) When this indication is displayed, wait more than 1 hour until condensation disappears.
TAPE!
Appears if a tape is not loaded when the Recording Start/ Stop Button or SNAPSHOT Button is pressed while the Power Switch is set to “A” or “M” and the VIDEO/ MEMORY Switch is set to “VIDEO”.
TAPE END
Appears when the tape ends during recording or playback. ( pg. 38)
SET DATE/TIME!
●Appears when the date/time is not set. ( pg. 8)
●Appears when the
LENS CAP
Appears for 5 seconds after power is turned on if the lens cap is attached.
A. DUB ERROR!
Appears if Audio Dubbing is attempted on a blank portion of a tape. ( pg. 37)
Appears if Insert Editing is attempted on a blank portion of a tape. ( pg. 37)
INSERT ERROR!
<CANNOT EDIT ON A LP RECORDED TAPE> <CHECK TAPE’S ERASE PROTECTION TAB>
●Appears if Insert Editing is attempted on a tape recorded in the LP mode. ( pg. 37)
●Appears if INSERT (I) on the remote control is pressed when the erase protection tab is set to “SAVE”. ( pg. 37)
MEMORY IS FULL
Appears when the memory card’s memory is full and shooting is not possible.
COPYING FAILED
●Appears if dubbing of copyguarded signals is attempted while this camcorder is being used as a recorder.
●Appears in the following cases when dubbing from a tape to a memory card (as digital stills):
•when no memory card is loaded.
•when the memory card’s memory is full.
•when the memory card is not formatted.
•when a
MEMORY CARD!
Appears if there is no memory card loaded when you attempt to record on a memory card or access data on a memory card.
PLEASE FORMAT
Appears when there is a problem with a memory card and its memory is corrupt, or it has not been initialized. Initialize the memory card. ( pg. 24)
NO IMAGES STORED
Appears if there are no image files stored in the memory card when you attempt memory card playback.
