VIDEO PLAYBACK
VIDEO RECORDING & PLAYBACK
EN 15
MasterPage: Video_Right
The Full-Function Remote Control Unit can operate this
camcorder from a distance as well as the basic
operations (Playback, Stop, Pause, Fast-Forward and
Rewind) of your VCR. It also makes additional playback
functions possible. (墌pg.16)
Installing The Battery
The remote control uses one
lithium battery (CR2025).
1Pull out the battery holder
by inserting a pointed
instrument into the slot.
2Insert the battery in the
holder, and be sure to have
the “+” mark visible.
3Slide the holder back in
until you hear a click.
Beam Effective Area
(indoor use)
When using the remote control,
be sure to point it at the remote
sensor. The transmitted beam’s
approximate effective distance
for indoor use is 5m (16 ft).
NOTE:
The transmitted beam may not be
effective or may cause incorrect
operation when the remote sensor
is directly exposed to sunlight or powerful lighting.
Buttons And Functions
AInfrared beam transmitting window
The following buttons are available only when the
camcorder’s Power Switch is set to “PLAY”.
BAUDIO Button ..................................... (墌pg. 25, 28)
CPAUSE Button*..........................................(墌pg. 16)
Up Button ..................................................(墌pg. 16)
DSLOW Rewind Button................................(墌pg. 16)
EREW Button* .......................................(墌pg. 14, 20)
Left Button ................................................ (墌pg. 16)
FINSERT Button.......................................... (墌pg. 37)
GSTOP Button*...................................... (墌pg. 14, 20)
Down Button ............................................. (墌pg. 16)
HSHIFT Button ............................................ (墌pg. 16)
IEFFECT ON/OFF Button .......................... (墌pg. 16)
JEFFECT Button ........................................ (墌pg. 16)
KSLOW Forward Button...............................(墌pg. 16)
LFF Button* ...........................................(墌pg. 14, 20)
Right Button ..............................................(墌pg . 16)
MPLAY Button*.......................................(墌pg. 14, 20)
NA. DUB Button........................................... (墌pg. 37)
ODISPLAY Button ................................. (墌pg. 17, 34)
The following buttons are available when the camcorder’s
Power Switch is set to “A” or “M”.
aS.SHOT (Snapshot) Button*
bSTART/STOP Button*
cZoom (T/W) Buttons** ........................(墌pg. 12, 16)
* Functions the same as each corresponding button on the
camcorder. (墌pg.51)
** Functions when the camcorder’s Power Switch is set to
“PLAY” as well.
Playback Using The Remote Control1
1
23
Slot
Remote sensor
T
W
GR-D94US.book Page 15 Monday, November 17, 2003 2:12 PM