GETTING STARTED
EN 5
MasterPage: Start_Right
GETTING STARTED
aAC Adapter AP-V14U or AP-V15U
bBattery Pack BN-V408U-B
cAudio/Video Cable (ø3.5 mini-plug to RCA plug)
dCore Filter (for USB Cable and optional S-Video
Cable. 墌pg. 6 for attachment)
eShoulder Strap (See the right column for attachment)
fCD-ROM
gMemory Card 16 MB (Already inserted in the
camcorder)
hRemote Control Unit RM-V718U
iLithium Battery CR2025* (for remote control unit)
jUSB Cable
kLens Cap (See the right column for attachment)
* A lithium battery is pre-installed in the Remote Control Unit
at time of shipment (with insulation sheet). To use the
Remote Control Unit, remove the insulation sheet.
NOTES:
●In order to maintain optimum performance of the
camcorder, provided cables may be equipped with one or
more core filter. If a cable has only one core filter, the end
that is closest to the filter should be connected to the
camcorder.
●Make sure to use the provided cables for connections. Do
not use any other cables.

How To Attach The Lens Cap

To protect the lens, attach the provided lens cap to the
camcorder as shown in the illustration.
NOTE:
To confirm the lens cap is on correctly make sure the cap is
flush to the camcorder.

How To Attach The Shoulder Strap

Follow the illustration.
1Thread the strap through the eyelet.
2Fold it back and thread it through the strap guide and
the buckle.
●To adjust the length of the strap, loosen and then tighten
the strap in the buckle.
3Slide the strap guide fully towards the eyelet.
Provided Accessories
90
23
4
6
we
5
T
W
or
Place here during shooting.
Push.
1
2
3
Strap guide
Buckle
Eyelet
GR-D94US.book Page 5 Monday, November 17, 2003 2:12 PM