16 EN, Normal Playback, Still Playback | JVC LYT1300-001A instruction

16 EN

VIDEO PLAYBACK

NOTES:

● Clean the video heads using an optional dry

Fast-Forward Button (5)

Play/Pause Button (4/9)

Rewind Button (3) Stop Button (8)

Speaker

BLANK SEARCH Button

VOLUME Wheel

Playback Mode Switch

• No picture during playback.
• Blocks of noise appear during playback.
For details, pg. 52.
● If Stop mode continues for 5 minutes when power
is supplied from a battery, the player shuts off
automatically. To turn on again, set the Power
Switch to “OFF”, then “ON”.
● The playback picture can be viewed in the LCD
monitor or on a connected TV. ( pg. 18)
● LCD monitor indications:
• When power is supplied from a battery: the
“	” battery indicator is displayed. ( pg. 47)
• When power is supplied from an AC outlet: the
“	” battery indicator does not appear.
● When a cable is connected to the S, AUDIO (L/R),
VIDEO or headphone connector, sound cannot be
heard from the speaker.

Power Switch

1Open the LCD monitor fully.

●Set the Video Output Mode Switch to “LCD MONITOR”. ( pg. 11)

2Load a cassette. ( pg. 14)

3Set the Playback Mode Switch to “VIDEO”.

4Set the Power Switch to “ON” while pressing down the Lock Button located on the switch.

5To start playback, press 4/9.

6To stop playback, press 8.

●During Stop mode, press 3 to rewind, or 5 to fast-forward the tape.

Maximum continuous playback time

Rotate the VOLUME Wheel towards “+” to turn up the volume, or towards “–” to turn down the volume.

Pauses during video playback.

1)Press 4/9 during playback.

2)To resume normal playback, press 4/9 again.

●If still playback continues for more than about 3 minutes, the player’s Stop mode is automatically engaged.

●When 4/9 is pressed, the image may not pause immediately while the player stabilises the still image.

Allows frame-by-frame search during video playback. This feature is available only with a tape recorded in DV recording mode.

1)Press 4/9 during playback.

2)Press R for forward and T for reverse.