EN 9

Power

This player’s 2-way power supply system lets you choose the most appropriate source of power. Do not use provided power supply units with other equipment.

Charging The Battery Pack

Battery pack

BN-V416U or

BN-V428U

To AC outlet

POWER indicator

AC Power Adapter/

Charger

CHARGE indicator DC OUT connector

1Make sure you unplug the player’s DC cord from the AC Power Adapter/Charger.

2Plug the AC Power Adapter/Charger’s power cord into an AC outlet. The POWER indicator lights.

3Attach the battery pack with the YZ mark aligned with the corresponding marks on the AC Power Adapter/Charger. The CHARGE indicator begins blinking to indicate charging has started.

4When the CHARGE indicator stops blinking but stays lit, charging is finished. Remove the battery pack.

5Unplug the AC Power Adapter/Charger’s power cord from the AC outlet.

Battery pack

Charging time

 

 

BN-V416U*

Approx. 2 hr.

 

 

BN-V428U

Approx. 3 hr. 20 min.

 

 

* Provided

 

NOTES:

If the protective cap is attached to the battery pack, remove it first.

If you connect the player’s DC cord to the AC Power Adapter/Charger during battery charging, power is supplied to the player and charging stops.

Charging is not possible if the wrong type of battery is used.

When charging the battery pack for the first time or after a long storage period, the CHARGE indicator may not light. In this case, remove the battery pack from the AC Power Adapter/Charger, then try charging again.

If the battery operation time remains extremely short even after having been fully charged, the battery is worn out and needs to be replaced.

Please purchase a new one.

For other notes,  pg. 42.

Using The Battery Pack

BATT.RELEASE

Switch

Arrow

1With the arrow on the battery pack pointing to the left, push the battery pack slightly against the battery pack mount a.

2Slide the battery pack to the left until it locks in place b.

To detach the battery pack...

Slide the battery pack to the right slightly while sliding BATT. RELEASE to detach it.

NOTES:

Available time is reduced significantly under the following conditions:

The LCD monitor is used repeatedly.

The playback mode is engaged repeatedly.

Before extended use, it is recommended that you prepare enough battery packs to cover 3 times the planned recording time.

ATTENTION:

Before detaching the power source, make sure that the player’s power is turned off. Failure to do so can result in a player malfunction.

CONTINUED ON NEXT PAGE

GETTING STARTED

Page 9
Image 9
JVC LYT1300-001A manual Power, Charging The Battery Pack, Using The Battery Pack, On Next