SYSTEM CONNECTIONS

EN 41

Connection To A Personal Computer

[A] Using USB cable

 

 

 

 

To USB connector

 

USB cable (provided)

 

 

OR

PC

To USB

 

[B] Using i.LINK cable

 

 

 

i.LINK cable

To i.LINK

 

(optional)

connector

 

 

PC with i.LINK

To i.LINK

 

connector

[A] Using USB cable

It is possible to do the following things:

Transfer still images stored on a memory card to a PC.

System Requirements

Windows®

OS: Windows® Me/2000/XP (pre-installed)

Connector: USB connector (standard equipment of the computer)

It is not possible to connect to Windows® 98/98SE PCs. Use the optional USB reader/writer CU- VUSD70, the PC card adapter CU-VPSD60 or the floppy disk adapter CU-VFSD50.

Macintosh

OS: Mac OS 9.0.4 to 9.2.2

Mac OS X 10.1.5/10.2.1 to 10.2.8/ 10.3.1 to 10.3.2 Connector: USB connector (standard equipment of the computer)

[B] Using i.LINK cable

It is also possible to transfer still/moving images to a PC with an i.LINK connector by using the software equipped with the PC or commercially available software.

Set “i.LINK OUT” to “SW”. ( pg. 28)

Set the i.Link Output Select Switch on this player to the appropriate mode ( pg. 33);

“DV”: when using the DV editing software

“MPEG2”: when using the MPEG2 editing software

Set the i.Link Output Select Switch to the appro- priate mode before connecting the i.Link cable.

NOTES:

It is recommended to use the AC Power Adapter/ Charger as the power supply instead of the battery pack. ( pg. 10)

Never connect the USB cable and the i.LINK cable simultaneously to the player. Connect only the cable you wish to use to the player.

Do not connect the player through a hub.

When using an i.LINK cable, be sure to use the optional JVC VC-VDV206U or VC-VDV204U i.LINK cable depending on the type of i.LINK connector (4 or 6 pins) on the PC.

If the PC connected to the player via the USB cable is not powered, the player does not enter the USB mode.

The date/time information cannot be captured into the PC.

Refer to the instruction manuals of the PC and Software.

The still images can also be transferred to a PC with an i.LINK connector-equipped capture board.

The system may not work properly depending on the PC or capture board you are using.

“USB MODE” and/or “ACCESSING FILES” appears on the LCD monitor while the PC is accessing data in the player or the player is transferring a file to the PC.

NEVER disconnect the USB cable while

“ACCESSING FILES” is displayed on the LCD monitor since this can result in product damage.

ADVANCED FEATURES

Page 41
Image 41
JVC LYT1300-001A manual Connection To a Personal Computer, Using USB cable, Using i.LINK cable