24 EN
Master Page: Left
By resetting the file name, a new folder will be
made. The new files you are going to make will be
stored in the new folder. It is convenient to separate
the new files from previously made files.
1Open the LCD monitor fully.
●Set the Video Output Mode Switch to “LCD
MONITOR”. (墌pg. 11)
2Load a memory card. (墌pg. 15)
3Set the Playback Mode Switch to “MEMORY”.
4Set the Power Switch to “ON” while pressing
down the Lock Button located on the switch.
●The still image which has been played back at
the last time is displayed.
5Press MENU. The Menu Screen appears.
6Press R or T to select “NO. RESET”, and press
MENU. The NO. RESET screen appears.
7Press R or T to select “EXECUTE”, and press
MENU. The new folder (such as “101JVCGR”)
will be made and the file made of the next shot
starts from DVC00001.
Folder and File names
Each time you dub still images recorded on a tape to
a memory card, a file name is made using a number
which is larger by one than the largest number of the
file names which are in use. Even if you delete an
image file with a number in the middle of range, the
number will not be used for a new shot; a gap will
remain in the numerical sequence. If the file name
reaches DVC09999, a new folder (such as
“101JVCGR”) will be made and the file name will
start again from DVC00001.
This player is compatible with the DPOF (Digital
Print Order Format) standard in order to support
future systems such as automatic printing. You can
select one of the 2 print information settings for
images stored in the memory card: “To Print All Still
Images (One Print For Each)”or“To Print By
Selecting Still Images And Number Of Prints”.
NOTES:
●If you load a memory card already set as shown
below in a printer compatible with DPOF, it will
make prints of the selected still images
automatically.
●To print images recorded on a tape, first dub them
to a memory card. (墌pg. 36)
To Print All Still Images (One Print For Each)
1Open the LCD monitor fully.
●Set the Video Output Mode Switch to “LCD
MONITOR”. (墌pg.11)
2Load a memory card. (墌pg. 15)
3Set the Playback Mode Switch to “MEMORY”.
4Set the Power Switch to “ON” while pressing
down the Lock Button located on the switch.
●The still image which has been played back at
the last time is displayed.
5Press MENU. The Menu Screen appears.
6Press R or T to select
“DPOF”, and press
MENU. The Sub Menu
appears.
7Press R or T to select
“ALL1”, and press MENU.
The DPOF screen appears.
8Press R or T to select
“EXECUTE”, and press
MENU. The normal
playback screen appears.
●To cancel selection,
select “RETURN”.
Resetting The File Name Setting Print Information (DPOF Setting)DPOF
M
E
NU
RENT
ALL 1
RESET
RETURN
CUR
DPOF
EXECUTE
ALL1?
RETURN
D.S.C. PLAYBACK (cont.)
CU-VH1E.book Page 24 Friday, March 26, 2004 1:55 PM