22 EN | D.S.C. PLAYBACK (cont.) |
Protecting Files
To protect the currently displayed file
The Protect mode helps prevent the accidental erasure of files.
RT Button | Playback Mode |
MENU Button | Switch |
|
7Press R or T to select “CURRENT”, and press MENU. The PROTECT screen appears.
8Press 3 or 5 to select the desired file.
MENU
PROTECT CURRENT PROT . ALL CANC . ALL
RETURN
Rewind Button (3) |
9Press R or T to select “EXECUTE”, and press MENU.
●To cancel protection, select “RETURN”.
●Repeat steps 8 and 9 for all files you want to protect.
PROTECT
PROTECTED
RETURN
Power Switch
1Open the LCD monitor fully.
●Set the Video Output Mode Switch to “LCD MONITOR”. ( pg. 11)
2Load a memory card. ( pg. 15)
3Set the Playback Mode Switch to “MEMORY”.
4Set the Power Switch to “ON” while pressing down the Lock Button located on the switch.
●The still image which has been played back at the last time is displayed.
5Press MENU. The Menu Screen appears.
6Press R or T to select
“PROTECT”, and press | MENU | |
PROTECT |
| |
MENU. The Sub Menu | DELETE |
|
DPOF | ||
appears. | NO . RESET | |
FORMAT | ||
| D I SPLAY | |
| END |
To protect all files stored in the memory card
7Press R or T to select “PROT.ALL”, and press MENU. The PROTECT screen appears.
8Press R or T to select “EXECUTE”, and press MENU.
● To cancel protection, select “RETURN”.
NOTES:
●If the “” mark appears, the currently displayed file is protected.
●When the memory card is initialised or corrupted, even protected files are deleted. If you do not want to lose important files, transfer them to a PC and save them.
To Remove Protection
Before doing the following, perform steps 1 – 6 in “Protecting Files” in the left column.
To remove protection from the currently displayed file
7Press R or T to select “CURRENT”, and press MENU. The PROTECT screen appears.
8Press 3 or 5 to select the desired file.
9