48 EN |
| TROUBLESHOOTING (cont.) |
Warning Indications |
|
|
|
|
|
Indications |
| Meaning |
|
| |
i.LINK CONNECTION | Appears when an i.LINK cable is connected but not detected. Disconnect the | |
ERROR! CHECK | cable once and connect it again, or disconnect other connected cables. | |
CABLE CONNECTION |
| ( pg. 33) |
|
| |
TO CHANGE i.LINK | Appears when you attempt to change the i.LINK output mode while an i.LINK | |
OUTPUT SETTING, | cable is connected. | ( pg. 33) |
DISCONNECT i.LINK |
|
|
CABLE, FIRST |
|
|
|
| |
INVALID DATA! | Appears when you attempt to dub signals which are copygurded or not | |
CAN NOT INPUT | compatible with this player through an i.LINK cable. | |
COPY PROTECTED |
|
|
CAN NOT INPUT |
|
|
CAN NOT DECODE |
|
|
VIDEO OR AUDIO |
|
|
|
| |
A. DUB ERROR! | Appears if Audio Dubbing is attempted on a blank portion of a tape. ( pg. 40) | |
|
| |
A. DUB ERROR! | ● Appears if Audio Dubbing is attempted on a tape recorded in SD or HD mode. | |
<MPEG2 RECORDED> |
| ( pg. 40) |
<CANNOT DUB ON A | ● Appears if Audio Dubbing is attempted on a tape recorded in the LP mode. | |
LP RECORDED TAPE> |
| ( pg. 40) |
<CANNOT DUB ON A | ● Appears if Audio Dubbing is attempted on a tape recorded in | |
16bit RECORDING> |
| ( pg. 40) |
<CHECK TAPE’S | ● Appears if A. DUB (D) on the remote control is pressed when the erase | |
ERASE PROTECTION | protection tab is set to “SAVE”. | ( pg. 40) |
TAB> |
|
|
|
|
|
Page 48
Image 48
