FORMAT
ERASE ALL
EX I ST I NG DATA?
EXECUTE
RETURN
DPOF
SHEETS
0 5

EN 25

To Print By Selecting Still Images And Number Of Prints

1Perform steps 1 6 in “To Print All Still Images (One Print For Each)” ( pg. 24).

2Press R or T to select

Initialising A Memory Card

You can initialise a memory card any time. After initialising, all files and data stored in the memory card, including those which have been protected, are cleared.

“CURRENT”, and press MENU. The DPOF screen

DPOF

1 Open the LCD monitor fully.

Set the Video Output Mode Switch to “LCD

appears.SHEETS

3 Press 3 or 5 to

0 0

RETURN

select the desired file.

 

4 Press R or T to select the number indication

(00), and press MENU.

2

MONITOR”. ( pg. 11)

Set the Playback Mode Switch to “MEMORY”.

3

Set the Power Switch to “ON” while pressing

 

down the Lock Button located on the switch.

5 Select the number of prints

by pressing R to increase number, or “T” to decrease the number, and press MENU.

Repeat steps 3 through 5

for the desired number

of prints.

The number of prints can be set up to 15.

To correct the number of prints, select the

4Press MENU. The Menu Screen appears.

5Press R or T to select “FORMAT”, and press MENU. The FORMAT screen appears.

MENU

PROTECT

DELETE DPOF

NO . RESET FORMAT D I SPLAY

END

PLAYBACK

image again and change the number.

6Press R or T to select

6 Press R or T to select “EXECUTE”, and press

“RETURN”, and press MENU. The “SAVE?”

DPOF

MENU. The memory card is initialised.

When initialisation is finished, “NO IMAGES

appears.

SAVE?

If you did not change

 

EXECUTE

CANCEL

any settings in step 3

 

through 5, the Menu

 

Screen reappears.

 

7Press R or T to select “EXECUTE” to save the setting you have just made, and press MENU. To cancel selection, select “CANCEL”.

To Reset The Number Of Prints

1Perform steps 1 6 in “To Print All Still Images (One Print For Each)” ( pg. 24).

2Press R or T to select “RESET”, and press MENU. The DPOF screen appears.

3Press R or T to select “EXECUTE”, and press MENU. The normal playback screen appears.

To cancel selection, select “RETURN”.

The number of prints is reset to 0 for all still images.

CAUTION:

While performing the above, never disconnect power, as this may cause the memory card to be corrupted.

STORED” appears.

To cancel initialisation, select “RETURN”.

CAUTION:

Do not perform any other operation (such as turning off the player) during initialisation. Also, be sure to use the provided AC Power Adapter/ Charger, as the memory card may be corrupted if the battery becomes exhausted during initialisation.

DIGITAL STILL CAMERA (D.S.C.)

Page 25
Image 25
JVC LYT1300-001A manual Initialising a Memory Card, To Print By Selecting Still Images And Number Of Prints