English
Common Operations
Setting the Clock | Turning On the Power and Selecting the | ||
|
| Sources | |
|
| ||
Before operating the unit any further, first set the clock built | |||
| |||
| |||
in this unit. | When you press the play button for a particular source (FM/ | ||
• As you plug in the AC power cord, the clock starts counting | AM, CD 6, TAPE 2 3, and AUX), the unit turns on. | ||
from “0:00.” | The unit starts playing the source if it is ready — COMPU | ||
|
| PLAY CONTROL. | |
On the remote control ONLY:
1 Press and hold SHIFT during the setting procedure.
2 Press CLOCK.
SHIFT
CLOCK
1 
To listen to the FM/AM broadcasts, press FM/AM. (See
page 11.)
To play back CDs, press CD 6. (See pages 12 – 18.)
To play back tapes, press TAPE 23. (See pages 19 – 20.) To select the external equipment as the source, press AUX.
| CD | TAPE |
FM /AM | SELECT | AUX |
CLOCK
The “CLOCK” indicator on the display lights up and the clock time start flashing.
3 Press SELECT – or + to set the |
| – SELECT + |
time. | 4 | 5 |
Pressing SELECT + increases the time and pressing SELECT – decreases the time. Pressing the button continuously advances or postpones the time in 10 minute intervals.
| CLOCK |
|
4 | Press SET. | SET |
|
| |
| The time display stops flashing. | 8 |
|
| |
5 | Release SHIFT. | SHIFT |
If there is a power failure
The clock loses the setting and is reset to “0:00.” You need to set the clock again.
To turn on the unit without playing, press | STANDBY |
(standby/on) so that the STANDBY lamp goes off.
To turn off the unit (on standby), press | STANDBY |
(standby/on) again so that the STANDBY lamp lights up.
A little power is always consumed even while the unit is on standby.
To switch off the power supply completely, unplug the AC
power cord from the AC outlet.
When you unplug the AC power cord or if a power failure occurs
The clock is reset to “0:00” right away, while the tuner preset stations (see page 11) will be erased in a few days.
– 9 –
