Basic Operations
The following operations are commonly used when you play any sound source.
Turning the Power On and Off
On the front panel:
To turn on the power, press POWER.
STANDBY
The STANDBY lamp goes off. The name of the current
English
source (or station frequency) appears on the display.
POWER
MUTE TUNED | SLEEP SEA | R | |
AUTO STEREO PRO LOGIC 3CH LOGIC HALL | LOUDNESS | VOLUME | |
DAP |
|
|
|
CH- |
|
| MHz |
|
| kHz |
Current source name appears | Current volume |
| level is shown here |
To turn off the power, press POWER again.
The STANDBY lamp lights up.
From the remote control: |
|
To turn on the power, press AUDIO. | AUDIO |
| |
The STANDBY lamp goes off. The name of the current |
|
source (or station frequency) appears on the display. |
|
To turn off the power, press AUDIO again.
The STANDBY lamp lights up.
Selecting the Source to Play
On the front panel:
1. Press SOURCE so that the Control 5 | / ∞ buttons | SOURCE |
|
work for selecting the source.
The lamp above the button lights up.
2.Press Control 5/ ∞ until the source name you want appears on the display.
VOLUME
Notes:
• When you change the source |
to an audio component |
(TUNER/BAND, CD, TAPE, TV |
SOUND or PHONO) while |
watching pictures from a video |
From the remote control:
Press one of the source buttons directly.
TUNER/BAND* | Listen to the radio. |
| Each time you press the button, the band |
| alternates between FM and AM. |
CD* | Listen to the CD player. |
TAPE* | Listen to the cassette deck. |
TV SOUND | Listen to TV sounds. |
VCR | View the playback picture from the VCR. |
DVD | Play back a stereo digital video disc. |
PHONO* | Listen to a record. |
DVD MULTI | Play back a digital video disc using the |
| analog discrete output mode (5.1 CH |
| reproduction) on the DVD player. |
TUNER/ | |||
BAND | |||
| TV |
| |
SOUND | |||
|
|
| O |
|
| N | |
| O |
| |
H |
|
| |
P |
|
|
|
CD |
|
TAPE | |
VCR |
|
DVD |
|
DVD |
|
MU | |
| LTI |
component (VCR, DVD or DVD |
MULTI), pictures from the video |
component remain on the TV |
screen. |
• When you press one of the |
source buttons on the remote |
control marked with an asterisk |
(*), the receiver automatically |
turns on. |
• When connecting this receiver |
and the DVD player by using |
the AV COMPU LINK cable, |
“DVD MULTI” is always |
selected when you start playing |
a disc of 5.1 ch surround. You |
can change it to “DVD” after |
playback starts. |
14