JVC RX-665VBK manual English, Press Control 2/ 3to select the center mode

5.Press Control 2/ 3to select the center mode.

Each time you press the button, the center modes change

as follows:
	WIDE		NORMAL	PHANTOM
WIDE		Select this mode when the center speaker can reproduce the bass
		better than the front speakers. All signals of the center channel are
		output through the center speaker.
NORMAL		Select this mode when the center speaker cannot reproduce the
		bass better than the front speakers. The bass portions of the center
		channel signals are output through the front speakers.
PHANTOM		Select this mode when you do not use a center speaker. The center
		speaker channel signals are output through the front speakers.

6. Press Control 5/ ∞ until “–DELAY +” appears on the display.

7. Press Control 2/ 3to adjust the delay time of the rear speaker output.

Each time you press the button, the delay time changes as follows:

DELAY 1 DELAY 2 DELAY 3

DELAY 1	Select this when the distance from you to your rear speakers is
	greater than that to the front speakers.
DELAY 2	Select this when the distance from you to your rear speakers is
	almost equal to that to the front speakers.
DELAY 3	Select this when the distance from you to your rear speakers is less
	than that to the front speakers.

8. Press Control 5/ ∞ until “TEST” appears on the display, then press Control 2/ 3 to start checking the speaker output balance.

“TEST” starts flashing on the display, and a test tone comes out of the speakers in the following order:

Left front	Center	Right front
speaker	speaker	speaker

Rear speakers

Continued to the next page.

English

Note:

When you have selected “3CHLOGIC,” you cannot select “PHANTOM.”

Note:

When you have selected “3CHLOGIC” or “THEATER,” you cannot adjust the delay time.

Notes:

•No test tone comes out of the rear speakers when you have selected “3CHLOGIC.”

•No test tone comes out of the center speaker when you select “PHANTOM” for the center mode.

34