JVC RX-665VBK manual English, After pressing VCR, you can perform the

IMPORTANT:

To operate JVC video components using this remote control:

•You need to connect JVC video components through the AV COMPU LINK jacks (see page 41).

•Some JVC VCRs can accept two types of the control signals — remote code “A”

and “B.” Before using this remote control, make sure that the remote control code of the VCR connected to the VCR jacks is set to code “A.”

•When operating the VCR and DVD player, aim the remote control directly at the remote sensor on the each component.

•When operating the TV having AV COMPU LINK “RECEIVER/AMP,” aim the remote control directly at the remote sensor on the receiver.

•When operating the TV having AV COMPU LINK “AV COMPU LINK EX,” aim the remote control directly at the remote sensor on the TV.

7 After pressing VCR, you can perform the	CATV/SAT TV	VCR AUDIO
following operations on the VCR:	CATV	SOUND

CONTROLCD-DISC CONTROL

English

Note:

If you choose a source on the front panel, the remote control will not operate that source.

3Starts playback.

1 Rewinds a video tape. ¡ Fast winds a video tape.

7Stops operation.

8Pauses. To resume playing, press 3.

CH +/– Changes the TV channel on the VCR.

You can always do the following on the VCR:

VCRTurn on and off the VCR (in the POWER section)

7After pressing TV SOUND, you can perform the following operations on the TV:

CH +/–	Changes the channels
1–9, 0, 100+	Selects the channels.
RETURN	Alternates between the previously
	selected channel and the current channel.

DAP MODE		3D-PHONIC			SURROUND
1		2					3
EFFECT		DELAY				TEST
4			5			6
SEA MODE		SEA PRESET				MENU
7/P		8					9
RETURN/ENTER		100+	– REAR•R +
10		+10					0
CENTER		REAR	TV				CH
		(L)	VOLUME
LIGHT ONE TOUCH			TV/VIDEO
	OPERATION
N			CD		TA
TU	ER/						PE
BAND
	TV	VCR			D	VD
	UND
SO		MUTING		DVD
PHONO						MULTI

VOLUME

You can always do the following on the TV:
TV VOLUME +/–	Adjust the volume.	RM-SR665U
TV/VIDEO	Sets the input mode (either TV or	REMOTE CONTROL
	VIDEO)
TV	Turns on or off the TV
(in the POWER section)

7After pressing DVD or DVD MULTI, you can perform the following operations on the DVD player:

3Starts playing.

4Returns to the beginning of the current (or previous) track. (When pressed briefly.)

¢Skips to the beginning of the next track. (When pressed briefly.)

1 Fast reverse a disc. (When pressed and held.) ¡ Fast foward a disc. (When pressed and held.)

7Stops playing.

8Pauses. To resume playing, press 3.

After pressing DVD or DVD MULTI, these buttons can be used for the

DVD menu operations.

DAP MODE	3D-PHONIC	SURROUND	Note:
1	2	3	For detailed menu operations, refer to
EFFECT	DELAY	TEST
4	5	6	the instructions supplied with the discs
SEA MODE	SEA PRESET	MENU	and the DVD player.
7/P	8	9
100+ – REAR•R +		RETURN/ENTER
+10	0	10

44