JVC RX-665VBK manual Using the DVD MULTI Playback Mode, English, On the front panel

Using the DVD MULTI Playback Mode

This receiver provides the DVD MULTI playback mode for reproducing the analog discrete output mode (5.1 CH) of the DVD player.

Before playing back a DVD, refer also to the manual supplied with the DVD player.

English

Speaker arrangements for DVD MULTI playback

The following illustration show how to obtain the optimum sound environment for the DVD MULTI playback mode. Try to find the speaker direction and location to create the optimum sound field.

Left front	Sub-	TV	Right front
	woofer
speaker			speaker
		Center
		speaker

Left	Right
rear	rear
speaker	speaker

Note:

You can place the subwoofer anywhere around you.

Activating the DVD MULTI playback

You can adjust the DVD MULTI playback mode while playing back a DVD using the analog discrete output mode on the DVD player.

Once you made adjustments, the receiver memorizes the adjustments until you change them. You also need to set the DVD player to the analog discrete output mode.

On the front panel:

1.Press DVD MULTI until “DVD MULTI” appears on the display.

2.Select the analog discrete output mode on the DVD player, and start playing a DVD.

Refer to the manual supplied with the DVD player.

If you want to make any adjustment, go to the following steps.

3.Press ADJUST so that the Control 5 / ∞/ 2 / 3 buttons work for adjusting the DVD MULTI playback mode.

The lamp above the button lights up.

4.Press Control 5/ ∞ until “–CENTER+” appears on the display.

5.Press Control 2/ 3 to adjust the center speaker output level.

•Pressing Control 2decreases the output level up to –10 dB.

•Pressing Control 3increases the output level up to +10 dB.

DVD MULTI

ADJUST

Note:

When you select “DVD MULTI” as the source to play, the Surround Processor modes are canceled temporarily.

38