JVC RX-665VBK manual Operating Other Manufacturers’ Video Equipment, English

Operating Other Manufacturers’ Video Equipment

English

To change the transmittable signals for operating another manufacturer’s VCR

1.	Press and hold VCR (in the POWER section).	CATV/SAT	TV VCR	AUDIO
			CATV	SOUND
			CONTROLCD-DISC CONTROL
2.	Press VCR.	DAP MODE	3D-PHONIC	SURROUND

3.Enter manufacturer’s code (two digits) using buttons 1–9, and 0.

See the list below to find the code.

4.Release VCR (in the POWER section).

Following button can be used for operating the VCR:

1 2 3

EFFECTDELAYTEST

4		5	6
SEA MODE	SEA PRESET		MENU
7/P	8		9
RETURN/ENTER	100+	– REAR•R +
10	+10		0
CENTER	REAR	TV	CH
	(L)	VOLUME
LIGHT ONE TOUCH		TV/VIDEO
OPERATION

		R/		CD	TAPE
	TU
		ND
VCR (in the POWER Turns on and off the VCR.	NE
	BA
		TV		VCR
section)					DVD
		UN
	SO		D		DVD
				MUTING
						MULTI
	PHONO

VOLUME

Note:

After pressing VCR, you can perform the following operations on the VCR:

CH +/–	Changes the TV channels on the VCR.
3	Starts playback.
1	Rewinds a video tape.
¡	Fast winds a video tape.
7	Stops operation.
8	Pauses. To resume playing, press 3.

5.Try to operate your VCR by pressing VCR POWER.

When your VCR turns on or off, you have entered the correct code.

RM-SR665U

REMOTE CONTROL

Refer to the manual supplied with your VCR.

If there are more than one code listed for your brand of VCR, try each one until

the correct one is entered.

Manufacturer	Codes	Manufacturer	Codes
EMERSON	11, 26	PHILIPS	09
FISHER	29	RCA	05, 06
FUNAI	10, 14, 15, 16	SAMSUNG	24
GOLD STAR	12	SANYO	21, 22, 23
HITACHI	04	SHARP	27, 28
JVC	01, 02, 03	SONY	18, 19, 20
MITSUBISHI	13	SHINTOM	30
NEC	25	ZENITH	08
PANASONIC	07, 17
		Manufacturers’ codes are subject to
		change without notice. If they are
		changed, this remote control cannot
		operate the equipment.

47