JVC RX-665VBK Using the Surround Processor, English, On the front panel, Using JVC 3D-PHONICModes

Using the Surround Processor

English

Using JVC 3D-PHONIC Modes

When using JVC 3D-PHONIC modes, you need only two front speakers to reproduce

the soundtracks of video software bearing the mark DOLBY SURROUND .

The 3D-PHONIC modes give you very realistic surround effects as if the sound is reproduced through the Dolby Surround decoder.

On the front panel:

1. Press SURROUND so that the Control 5 / ∞/ 2 / SURROUND

3buttons work for selecting the Surround Processor mode.

The lamp above the button lights up.

2.Press Control 5/ ∞ until one of the 3D-PHONIC mode (“3DACTION,” “3DTHEATR” or “3DDRAMA”) appears on the display.

Each time you press the button, Surround Processor mode changes as follows:

Note:

When one of the 3D-PHONIC modes is selected, the 3D- PHONIC indicator also lights up on the display.

Ex.

PROLOGIC THEATER 3CHLOGIC

OFF 3DACTION* PAVILION*

(One of the three modes appears)

*As for the DAP modes (see page 29) and the 3D- PHONIC modes, one of the previously selected mode appears on the display.

3.Press Control 2/ 3until the 3D-PHONIC mode you want appears on the display.

Each time you press the button, the 3D-PHONIC modes change as follows:

3DACTION 3DTHEATR 3DDRAMA

3DACTION	Best for action and war movies — where the action is fast
	and explosive.
3DTHEATR	Reproduces the sound field of a large theater.
3DDRAMA	Best for dramas and romantic movies — where the action is
	slow and soft.
	ADJUST

4.Press ADJUST so that Control 5 / ∞ buttons work for adjusting the effect level.

The lamp above the button lights up.

5.Press Control 5/ ∞ until “–EFFECT+” appears on the display.

Note:

Once you have adjusted the effect level, it is memorized for each 3D- PHONIC mode.

27