JVC RX-665VBK AV COMPU LINK Remote Control System, English, Connect to the terminal indicated in

English

AV COMPU LINK Remote Control System

The AV COMPU LINK remote control system allows you to operate JVC video components (TV, VCR, and DVD player) through the receiver.

To use this remote control system, you need to connect the video components you want to operate, following the procedures below.

1.Connect your VCR, DVD player, and TV as follows, using the cables with the monaural mini-plug (not supplied).

Notes:

• Without connecting the video

components with RCA pin plugs

as described on page 11, the AV

VCR

VHS

AV

COMPU LINK

DVD player

DVD

AV

COMPU LINK

TV

AV

COMPU LINK

If the AV COMPU LINK terminal on the TV is “RECEIVER/AMP”

			AV
			COMPU LINK
	RECEIVER/AMP	or	RECEIVER/
EX	(VCR)		AMP

COMPU LINK remote control

system cannot operate the

components.

• Refer also to the manuals

supplied with your video

components.

	If the AV COMPU LINK terminal on
IMPORTANT:	the TV is “AV COMPU LINK EX”
Connect to the terminal indicated in	AV
the illustration.
	COMPU LINK EX

DO NOT connect to the TV terminal.

2.Connect the VCR, DVD player, and TV using the cables with RCA pin plug, see pages 11 and 12.

If you connect the VCR or DVD player to the TV directly using an S-video cable, leave the corresponding video input on this receiver unplugged — VCR IN (PLAY) for the VCR or DVD for the DVD player.

3.When turning on the TV for the first time after the AV COMPU LINK connection, turn the TV volume to the minimum using the TV volume control on the TV.

41