CONTROL
DOWN UP
T SETTING

Speaker size

Register the sizes of all the connected speakers.

When you change your speakers, register the information about the speakers again.

1 Press SETTING repeatedly until

ST SETTING

“FRNT SP (Front Speaker)”, “CNTR SP (Center Speaker)” or “REAR SP

(Rear Speaker)” (with the current setting)* appears on the display.

SPK 1

DIGITAL AUTO L C R

LINEAR PCM S.WFR LFE

LS S RS

CH-

*“LARGE” is the initial setting for the front speakers and “SMALL” is for the center and rear speakers. If you have already changed the setting, another size will be shown.

2 Press CONTROL UP 5/DOWN to CONTROL

DOWN UP

select the appropriate item about the speaker selected in the above step.

Each time you press the button, the display changes as follows:

LARGE SMALL

NONE

LARGE : Select this when the speaker size is relatively large. (See “Notes” on the below.)

SMALL : Select this when the speaker size is relatively small. (See “Notes” on the below.)

NONE : Select this when you have not connected a speaker. (Not selectable for the front speakers)

3Repeat steps 1 and 2 to select the appropriate items for other speakers.

Notes:

Keep the following comment in mind as reference when adjusting.

If the size of the cone speaker unit built in your speaker is greater than 12 cm (4 3/4 inches), select “LARGE,” and if it is smaller than 12 cm (4 3/4 inches), select “SMALL.”

If you have selected “NO” for the subwoofer setting, you can only select “LARGE” for the front speaker setting.

If you have selected “SMALL” for the front speaker setting, you cannot select “LARGE” for the center and rear speaker settings.

Speaker distance

Register the unit you use, then the speaker distance from your listening point.

If you have set the unit before, start from step 3.

Speaker distance is not valid for the DVD MULTI playback mode.

1 Press SETTING repeatedly until

T

SETTING

 

 

 

“UNIT” (with the current setting)*

 

 

 

 

 

 

appears on the display.

 

 

 

 

 

 

 

 

 

SPK 1

 

 

 

 

DIGITAL AUTO L C R

 

 

 

 

LINEAR PCM S.WFR LFE

 

 

 

 

LS S RS

 

 

 

 

CH-

 

 

 

 

 

 

 

 

*“METER” is the initial setting. If you have already changed the setting, “FEET” will be shown.

2 Press CONTROL UP 5/DOWN to select the unit.

Each time you press the button, the setting alternates between “METER” and “FEET.”

METER : Speaker distance is shown in meter.

FEET : Speaker distance is shown in feet.

3 Press SETTING repeatedly until “FRNT DIS (Front distance),” “CNTR DIS (Center distance)” or “REAR DIS (Rear distance)” (with the current setting)* appears on the display.

The display shows the current setting in the unit selected in

step 2.

*“3.0m” is the initial setting for meter and “10FT” is for feet. If you have already changed the setting, another value will be shown.

4 Press CONTROL UP 5/DOWN to CONTROL

DOWN UP

select the appropriate speaker distance.

If you select “METER” in step 2, the value is changed from “0.3m” to “9.0m” by 0.3 m step.

If you select “FEET” in step 2, the value is changed from “1FT” to “30FT” by 1 foot step.

Left front

 

 

 

Right front

speaker

 

Center speaker

 

speaker

 

 

 

 

 

3.0 m

(10 feet)

2.7 m

(9 feet)

2.4 m

(8 feet)

2.1 m

(7 feet)

Left rear

Right rear

speaker

speaker

Example: In this case,

set “FRNT DIS” to “3.0m” or “10FT,” set “CNTR DIS” to “2.7m” or “9FT” and, set “REAR DIS” to “2.4m” or “8FT.”

Note:

If you have selected “NONE” for the center and rear speakers setting,

you cannnot set the speaker distance for the center and rear speakers.

Basic Settings

17

Page 19
Image 19
JVC RX-7020VBK manual Unit with the current setting Appears on the display, Press Control UP 5/DOWN ∞ to select the unit

RX-7020VBK specifications

The JVC RX-7020VBK is a versatile and powerful audio receiver designed to provide an immersive sound experience for home theater enthusiasts and casual listeners alike. This 5.1-channel receiver supports various audio formats and delivers high-quality sound that complements any entertainment setup. One of the standout features of the RX-7020VBK is its impressive power output. With 100 watts per channel, this receiver ensures that your audio fills the room with rich and dynamic sound. It is perfect for movies, music, and gaming, allowing every detail to come to life.

In terms of connectivity, the JVC RX-7020VBK offers multiple input options, including HDMI, digital optical, coaxial, and analog inputs. This wide range of connectivity options allows users to connect various devices such as Blu-ray players, gaming consoles, and streaming devices, making it a versatile choice for any home entertainment system. The receiver also includes AM/FM radio capabilities, giving users access to a variety of listening options.

The RX-7020VBK is equipped with Dolby Digital and DTS surround sound technologies, providing a surround sound experience that enhances movie watching and gaming. These technologies allow for precise sound placement, giving users a realistic audio experience that draws them into the action. Furthermore, the receiver includes a built-in equalizer, offering users the ability to customize their audio settings according to their preferences.

Another noteworthy feature of the JVC RX-7020VBK is its user-friendly interface. The receiver comes with an intuitive remote control that allows for easy navigation through menus and settings, making it accessible for all users, regardless of their technical expertise. Additionally, the receiver has a sleek and modern design that blends seamlessly with any home décor.

The JVC RX-7020VBK also incorporates advanced protection circuits to safeguard against damage from overheating and overloads, ensuring longevity and reliability. With its combination of power, versatility, and user-friendly features, the JVC RX-7020VBK stands out as an excellent choice for those looking to elevate their audio experience at home. Its balance of performance and technological advancements makes it suitable for both dedicated audiophiles and casual users alike.