On the front panel:
1Start playing 2 channel
2 Press SURROUND ON/OFF to activate Surround mode.
When Surround mode turns on, the last selected
Surround mode will be activated.
•Each time you press the button, Surround mode turns on and off alternately.
3Press SURROUND MODE repeatedly SURROUND MODE
until one of the DAP
and
The DSP indicator also lights up on the display.
5Only for DAP modes: Adjust the effect level.
1) Press ADJUST repeatedly until “EFFECT” (with the current setting)* appears on the display.
*“EFFECT 3” is the initial setting. If you have already changed the setting, another setting will be shown.
2) Press CONTROL UP 5/ | DOWN UP |
| CONTROL |
DOWN ∞ to select the effect |
|
level (1 to 5) you want. |
|
•Each time you press the button, the effect level changes as follows:
EFFECT 1 
EFFECT 2 
EFFECT 3
EFFECT 5 |
| EFFECT 4 |
|
As the number increases, selected mode becomes stronger (normally set it to “EFFECT 3”).
Creating Realistic Sound Fields
If you like to adjust sound, go to step 4.
4Adjust the speaker output levels.
1)Press ADJUST repeatedly until one
ADJUST SETTING
of the following indications (with the current setting)* appears on the display.
REAR L : To adjust the left rear speaker output level
REAR R : To adjust the right rear speaker output level
CENTER : For “ALL CH STEREO”
|
| center speaker output level |
| |
|
|
| ||
|
|
| ||
| * “0” is the initial setting. If you have already changed the | |||
|
| setting, another number (level) will be shown. |
| |
2) | Press CONTROL UP 5/ | CONTROL | ||
DOWN UP | ||||
|
|
| ||
DOWN ∞ to adjust the selected speaker output levels.
3)Repeat steps 1) and 2) to adjust the other speaker levels.
To cancel DAP modes and All Channel Stereo
Press SURROUND ON/OFF again so that “SURROUND OFF” appears on the display. The DSP indicator goes off.
29
