JVC RX-7020VBK Using DVD MULTI Playback Mode, Activating DVD MULTI Playback Mode, Press DVD MULTI

Using DVD MULTI Playback Mode

This receiver provides the DVD MULTI playback mode for reproducing the analog discrete output mode of the DVD player. Before playing back a DVD, refer also to the manual supplied with the DVD player.

Activating DVD MULTI Playback Mode

You can adjust the DVD MULTI playback mode while playing back a DVD using the analog discrete output mode on the DVD player. Once you have made adjustments, the receiver memorizes the adjustments until you change them.

You also need to set the DVD player to the analog discrete output mode.

Before you start, remember....

There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

On the front panel:
1 Press DVD MULTI.	DVD MULTI

From the remote control:

1 Press DVD MULTI. DVD MULTI

Note:

When you select “DVD MULTI” as the source to play, Surround mode is canceled, and the SURROUND ON/OFF and SURROUND MODE buttons do not work.

2Select the analog discrete output mode on the DVD player, and start playing a DVD.

•Refer also to the manual supplied with the DVD player.

If you need to make any adjustments, go to the following steps.

3 Press SOUND. SOUND

The 10 keys are activated for adjusting the sound.

4Adjust the speaker output levels.

– CENTER+

Notes:

•When you select “DVD MULTI” as the source to play, the Surround mode is canceled, and the SURROUND ON/OFF and SURROUND MODE buttons do not work.

•If you select the source to DVD MULTI while using both the speakers connected to the FRONT SPEAKERS 1 and 2 terminals, the speakers connected to the FRONT SPEAKERS

2 terminals are deactivated.

•When selecting “DVD MULTI” as the source, you can only select either the speakers connected to the FRONT SPEAKERS 1 or 2 terminals.

2Select the analog discrete output mode on the DVD player, and start playing a DVD.

•Refer also to the manual supplied with the DVD player.

If you need to make any adjustments, go to the following steps.

3Adjust the speaker output levels.

1) Press ADJUST repeatedly until one	ADJUST SETTING
of the following indications appears
on the display:

CENTER :To adjust the center speaker output level (–10 dB to +10 dB).

REAR L : To adjust the left rear speaker output level (–10 dB to +10 dB).

REAR R : To adjust the right rear speaker output level (–10 dB to +10 dB).

2) Press CONTROL UP 5/DOWN ∞ CONTROL

DOWN UP

to adjust the selected speaker output levels.

3)Repeat steps 1) and 2) to adjust the other speaker output levels.

•To adjust the center speaker level, press CENTER +/– (–10 to +10).

•To adjust the left rear speaker level, press REAR•L +/– (–10 to +10).

•To adjust the right rear speaker level, press REAR•R +/– (–10 to +10).

2 3

MENU

–REAR• L+

5 6

ENTER

ENTER

–REAR• R+

8 9

30