JVC RX-7020VBK manual CD player, CD changer, Turntable, Cassette deck, CD recorder

CD player

After pressing CD, you can use the following buttons for CD operations:

3	: Start playback.
4	: Return to the beginning of the current
	(or previous) track.
¢	: Skip to the beginning of the next track.
7	: Stop playback.
8	: Pause playback. To release it, press 3.
1 – 10, +10	: Select a track number directly.
	• For track number 5, press 5.

• For track number 15, press +10, then 5.

• For track number 20, press +10, then 10.

CD changer

After pressing CONTROL repeatedly until “CDDSC” appears on the display window, you can perform the following operations on the CD changer:

3	: Start playback.
4	: Return to the beginning of the current
	(or previous) track.
¢	: Skip to the beginning of the next track.
7	: Stop playback.
8	: Pause playback. To release it, press 3.
1 – 6, 7/P	: Select the number of a disc installed in a CD
	changer.

Turntable

After pressing PHONO, you can perform the following operations on the turntable:

3	: Start playing.
7	: Stop operations.

Cassette deck

After pressing TAPE/CDR (or CONTROL repeatedly until “TAPE” appears on the display window), you can use the following buttons for cassette deck operations:

3	: Start playback.
FF	: Fast wind a tape from left to right.
REW	: Fast wind a tape from right to left.
7	: Stop playback or recording.
8	: Pause playback. To release it, press 3.
REC PAUSE	: Press this button to enter recording pause.
	Press this button then 3 to start recording.

Notes:

•Before starting the above operations, make sure that you have changed the source name correctly. See page 11.

•You can use either TAPE/CDR button or CONTROL button to activate the buttons listed above. If you press TAPE/CDR, the playing source also changes. On the other hand, if you press CONTROL repeatedly to select “TAPE,” the playing source does not change.

Operating JVC’s Audio/Video Components

After pressing CD, you can perform the following operations on the CD changer:

1 – 10, +10: Select a track number directly. For track number 5, press 5.

For track number 15, press +10, then 5. For track number 20, press +10, then 10.

For track number 30, press +10, +10, then 10.

Example:

•Selecting disc number 4, track number 12, and starting playback.

1.Press CONTROL repeatedly until “CDDSC” appears on the display window, then press 4.

2.Press CD, then press +10, 2.

If your CD changer is of 200-disc loading capability (except for XL-MC100 and XL-MC301),

you can do the following operations using the number buttons after pressing CD:

1Select a disc number.

2Then select a track number (always enter two digits).

3Start playback.

Examples:

•Selecting disc number 3, track number 2, and starting playback. Press 3, then, 0, 2, then 3.

•Selecting disc number 10, track number 5, and starting playback. Press 1, 0, then, 0, 5, then 3.

•Selecting disc number 105, track number 12, and starting playback.

Press 1, 0, 5, then 1, 2, then 3.

CD recorder

After pressing TAPE/CDR (or CONTROL repeatedly until “TAPE” appears on the display window), you can use the following buttons for CD recorder operations:

3	: Start playback.
4	: Return to the beginning of the current
	(or previous) track.
¢	: Skip to the beginning of the next track.
7	: Stop playback.
8	: Pause playback. To release it, press 3.
REC PAUSE	: Press this button to enter recording pause.

Press this button then 3 to start recording.

Notes:

•Before starting the above operations, make sure that you have changed the source name correctly. See page 11.

•“TAPE” appears on the display window even though you have changed the source name to “CDR.”

•You can use either TAPE/CDR button or CONTROL button to activate the buttons listed above. If you press TAPE/CDR, the playing source also changes. On the other hand, if you press CONTROL repeatedly to select “TAPE,” the playing source does not change.

35