JVC RX-DP20VSL Receiving Radio Broadcasts, door), 1. Press FM/AM, about 10 seconds, Using Preset Tuning, the frequency you want, flashing on the display

Receiving Radio Broadcasts

You can browse through all the stations or use the preset function to go immediately to a particular station.

IMPORTANT:

•When using the unit:

Press DOOR DOWN to use the buttons inside the front door.

DOOR

DOWN

To close the front door, press DOOR UP.

•When using the remote control:

Check the indication shown on the remote’s display when you press a button—this indicates the remote control operation mode for a while.

DVD AUDIO

LEARN TRANSMIT

TV/DBS VCR 1

LEARN TRANSMIT

Ex. When you press FM/AMTuning in to Stations Manually

On the unit ONLY:

1. Press FM/AM. FM/AM

The last received station of the last selected band is tuned in.•Each time you press the button, the band alternates between FM and AM (MW/LW).

ANALOG		TUNED	AUTO MUTING
L	R		SPEAKERS 1
SUBWFR			VOLUME

dB

2. Press TUNING 5 / ∞ (inside
	DOWN	UP
the front door) until you find	/ TUNING	/ TUNING
the frequency you want.

Notes:

•When a station of sufficient signal strength is tuned in, the TUNED indicator lights up on the display.

•When an FM stereo program is received, the STEREO indicator also lights up.

•When you hold the button (and release it) in step 2, the frequency keeps changing until a station is tuned in.

Using Preset Tuning

Once a station is assigned to a channel number, the station can be quickly tuned in. You can preset up to 30 FM and 15 AM (MW/LW) stations.

To store the preset stations

Before you start, remember...

•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

On the unit ONLY:

1.Tune in to an FM orAM (MW/LW) station you want to preset (see “Tuning in to Stations Manually”).

•If you want to store the FM reception mode for an FM station, select the FM reception mode you want. See “Selecting the FM Reception Mode.”

ANALOG		TUNED	STEREO	AUTO MUTING
L	R			SPEAKERS 1
SUBWFR				VOLUME

dB

2. Press MEMORY (inside the front					SET
					/ MEMORY
door).
	ANALOG	TUNED	STEREO	AUTO MUTING	SPEAKERS	1
L	R
SUBWFR						VOLUME
						dB
The channel number position starts flashing on the display for
about 10 seconds.
3. Press PRESET 5 / ∞ (inside				LEFT		RIGHT
				/ PRESET		/ PRESET
the front door) to select a
channel number while the channel
number position is flashing.
	ANALOG	TUNED	STEREO	AUTO MUTING
L	R			SPEAKERS		1
SUBWFR						VOLUME
						dB
4. Press MEMORY again while the					SET
selected channel number is				/ MEMORY
flashing on the display.

The selected channel number stops flashing.The station is assigned to the selected channel number.

5.Repeat steps 1 to 4 until you store all the FM and AM (MW/LW) stations you want.

To erase a stored preset stationStoring a new station on a used number erases the previously stored one.

25