JVC RX-DP20VSL MID, BASS, FREQ, Press, +6 dB, +6 dB, 100 Hz, 1.0 kHz, LEVEL :, 1.0 kHz, LEVEL :, LEVEL :, to –6dB), 10.0 kHz, TREBLE FREQ, 7Submenu items, 5Press EXIT once

1Adjusting the Parametric Equalizer for Each Channel—PEQ FRONT/CENTER/ SURROUND/SURR BACK

You can adjust equalization patterns to your preference. First, on the ADJUST MENU screen, select the signal channel (speaker) you want to adjust, then move to its submenu.

Notes:

•If “NO” or “NONE” is selected for a speaker on the SPEAKER SETTING submenu (see page 32), you cannot select the corresponding channel.

•If THX is activated, Parametric Equalizer is not available.

•If “EXT 7.1CH” is selected as the source, Parametric Equalizer for the surround back channel is not available.

7Adjustment procedure

1Press ﬁ or % (DOWN or UP) to select the channel—PEQ FRONT, CENTER, SURROUND, or SURR BACK, then press SET.

The submenu of the selected channel appears.2Press ﬁ or % (DOWN or UP) to select an item you want to adjust on the submenu.3Press # or @ (RIGHT or LEFT) to adjust the item.

•Once one of the sound levels—“BASS LEVEL,” “MID LEVEL” and “TREBLE LEVEL”—is adjusted, the PARAMETRIC EQ indicator lights up on the display.

4Repeat steps 2 and 3 to adjust the other items on the same submenu.5Press EXIT once.The ADJUST MENU appears again.6Repeat steps 1 to 5 to adjust the other channels.

To cancel the adjustment, set all the sound levels—“BASS LEVEL,” “MID LEVEL” and “TREBLE LEVEL”—to “0 dB.” The PARAMETRIC EQ indicator goes off.

7Submenu itemsOn this submenu, you can adjust the following items for each channel:

BASS	FREQ* : Select the center frequency to adjust bass
	sounds from—63 Hz, 80 Hz, 100 Hz
	(initial), 125 Hz, 160 Hz, 200 Hz, 250 Hz,
	320 Hz, 400 Hz, 500 Hz, 630 Hz, 800 Hz,
	1.0 kHz.

	LEVEL : Adjust the enhancement level for bass sounds
	(within the range of +6 dB to –6 dB).

MID	*FREQ : Select the center frequency to adjust**
	middle-range sounds from—250 Hz,
	320 Hz, 400 Hz, 500 Hz, 630 Hz, 800 Hz,
	1.0 kHz (initial), 1.25 kHz, 1.6 kHz,
	2.0 kHz, 2.5 kHz, 3.2 kHz, 4.0 kHz.

	LEVEL : Adjust the enhancement level for middle-
	range sounds (within the range of +6 dB
	to –6 dB).

TREBLE FREQ* : Select the center frequency to adjust treble sounds from—1.0 kHz, 1.25 kHz, 1.6 kHz,

2.0kHz, 2.5 kHz, 3.2 kHz, 4.0 kHz, 5.0 kHz,6.3kHz, 8.0 kHz, 10.0 kHz (initial),12.5kHz, 16.0 kHz.

LEVEL : Adjust the enhancement level for treble sounds (within the range of +6 dB to –6 dB).

Note:

*Adjustable range changes according to the other two frequency settings.

Continued on the next page.