TV
CATV/
DBS
Operating Video Components

IMPORTANT:

To operate JVC’s video components using this remote control:

•Some JVC VCRs can accept two types of the control signals— remote codes “A” and “B.” Before using this remote control, make sure that the remote control code of the VCR connected to the VCR 1 jacks is set to code “A.”

–When another JVC VCR is connected to the VCR 2 and VIDEO jacks, set its remote control code to code “B.” (This remote control cannot emit the control signals of code “B.”)

•To operate the video component(s) using the remote control:

–Aim the remote control directly at the remote sensor on each component, not on the receiver.

When using the remote control:

–Set the TV operation mode selector to “TV” or

“CATV/DBS” correctly.

To operate TV, set it to “TV.”

–Check the indication shown on the remote’s display when you press a button—this indicates the remote control operation mode for a while.

–The CONTROL button can change the remote control operation mode without changing the source.

Each time you press the button, the remote control operation mode changes in the sequence—VCR1 = TAPE = CDR = CD DISC = (back to the beginning).

DVD AUDIO

LEARN TRANSMIT

TV/DBS

VCR 1

LEARN TRANSMIT

Ex. When you press VCR1
VCR (VCR connected to the VCR 1 jacks)

You can always perform the following operations:

VCR 1

 

: Turns on or off the VCR.

 

After pressing VCR 1 or selecting “VCR1” by pressing CONTROL repeatedly, you can perform the following operations on the VCR:

1 – 9, 0: Selects the TV channels on the VCR.

PLAY

: Starts playing.

REW

: Rewinds a tape.
FF: Fast-winds a tape.

STOP

: Stops operations.

PAUSE

: Pauses playing. To release, press PLAY.

REC

: Press this button together with the PLAY button

to start recording.

Press this button together with the PAUSE button to enter recording pause.

CHANNEL +/– : Changes the TV channels on the VCR.DVD player

You can always perform the following operations:

DVD

 

: Turns on or off the DVD player.

 

After pressing DVD or DVD MULTI, you can perform the following operations on the DVD player:

1 – 10, 0, +10 : Selects the DVD titles or the chapters.

PLAY

: Starts playing.

4: Returns to the beginning of the current (or previous) chapter.¢: Skips to the beginning of the next chapter.

STOP

: Stops playing.

PAUSE

: Stops playing temporarily. To release, press

 

PLAY.
After pressing DVD MENU, these buttons can be used for the DVD menu operations.

SET

DVD

MENU

Note:

Refer also to the manual supplied for your DVD player (and the instruction supplied for the discs).

TV

You can always perform the following operations (with the TV operation mode selector set to “TV”):

TV/DBS

 

 

: Turns on or off the TV.

 

TV VOL +/– : Adjusts the volume.

TV/VIDEO

: Sets the input mode (either TV or VIDEO).

After pressing TV/DBS (with the TV operation mode selector set to “TV”), you can perform the following operations on a TV:

CHANNEL +/– : Changes the channels.1 – 9, 0, 100+ : Selects the channels.

RETURN : Alternates between the previously selected channel and the current channel.

63