Operating JVC’s Audio/Video Components

You can operate JVC’s audio and video components with this receiver’s remote control, since control signals for JVC components are preset in the remote control.

Operating Audio Components

IMPORTANT:

To operate JVC’s audio components using this remote control:

•You need to connect JVC audio components through the COMPU LINK (SYNCHRO) jacks (see page 55) in addition to the connections using cables with RCA pin plugs (see pages 11 and 12).

•Aim the remote control directly at the remote sensor on the receiver.

•To operate a source with the remote control, the source must be selected using source selecting buttons on the remote control.

•To operate the cassette deck or MD recorder using the COMPU LINK remote control system, set the source name correctly. (See page 23.)

•Refer also to the manuals supplied with your components.

When using the remote control:

–Check the indication shown on the remote’s display when you press a button—this indicates the remote control operation mode for a while.

–The CONTROL button can change the remote control operation mode without changing the source.

Each time you press the button, the remote control operation mode changes in the sequence—VCR1 =TAPE = CDR =CD DISC = (back to the beginning).

DVD AUDIO

LEARN TRANSMIT

TV/DBS

VCR 1

LEARN TRANSMIT

Ex. When you press FM/AM.

TunerYou can always perform the following operations:
FM/AM: Tunes in to the last station of the last

 

selected band. Each time you press the

 

button, the band alternates between FM

 

and AM (MW/LW).
After pressing FM/AM, you can perform the following operations:
1 – 10, +10: Selects a preset channel number directly.

 

For channel number 5, press 5.

 

For channel number 15, press +10, then 5.

 

For channel number 20, press +10, then 10.
PTY SEARCH: Searches for a program by PTY codes.
PTY +/–: Selects the PTY codes.
DISPLAY MODE: Shows the RDS signals.
TA/NEWS/INFO: Select the Enhanced Other Networks data

 

type (TA, NEWS, INFO)
FM MODE: Changes the FM reception mode.
Sound control section (Amplifier)

You can always perform the following operations:

THX: Selects the THX modes.
SURROUND: Selects the Surround modes
EX/ES/7.1: Selects the 7.1-channel reproduction

 

modes.
DSP: Selects the DSP modes.
SURR/DSP OFF: Deactivates the THX/Surround/DSP

 

modes.

ANALOG DIRECT: Turns on or off Analog Direct.
ANALOG/DIGITAL INPUT : Selects the analog/digital inputs.
CC CONVERTER: Turns on or off CC Converter.
After pressing SOUND, you can perform the following operations:TEST: Turns on or off the test tone output.FRONT•L then LEVEL +/– : Adjusts the left front speaker channel output level.FRONT•R then LEVEL +/– : Adjusts the right front speaker channel output level.SUBWFR then LEVEL +/– : Adjusts the subwoofer output level.CENTER then LEVEL +/– : Adjusts the center speaker channel output level.SURR•L then LEVEL +/– : Adjusts the left surround speaker channel output level.SURR•R then LEVEL +/– : Adjusts the right surround speaker channel output level.

SURR BK•L then LEVEL +/– : Adjusts the left surround back speaker channel output level.

SURR BK•R then LEVEL +/– : Adjusts the right surround back

 

channel speaker output level.
EFFECT: Selects the effect level.
LIVENESS: Selects the liveness.

Notes:

•After adjusting sounds, press the corresponding source selecting button to operate your target source by using the 10 keys; otherwise, the 10 keys cannot be used for operating your target source.

•When you press LEVEL + or LEVEL –, the corresponding speaker name appears on the remote’s display.

61