JVC RX-DP20VSL Basic Settings, NOTICE—, Setup Menu Configuration

Basic Settings

Some of the following settings are required after connecting and positioning your speakers, while others will make operations easier.

Setup Menu Configuration

SETUP MENU (1)	1 SPEAKER SETTING	SETUP MENU (2)
		8 DUAL MONO
	(See page 32.)
		(See page 36.)
		9 DIGITAL IN/OUT
		(See page 36.)
	2 CHANNEL LEVEL
SETUP MENU (2)	(See page 32.)
		SETUP MENU (1)
		p VIDEO INPUT
		(See page 37.)

3SPEAKER DISTANCE

(See page 34.)

q VIDEO POWER (See page 37.)

w SPEAKER 2

4 SUBWOOFER(See page 37.) (See page 34.)

e SUPERIMPOSE (See page 38.)

5THX AUDIO SETUP (See page 35.)

r FL DISPLAY (See page 38.)

t ONE TOUCH OPE

6 SURR CH OUT(See page 38.) (See page 36.)

7 AUDIO DELAY (See page 36.)

Note:

When performing the basic settings viewing the indications on the main unit’s display, the indications are slightly different from what are shown on the on-screen display.

This is because of the limited number of characters shown on the main unit’s display.

Ex. • “SPEAKER SETTING” is shown as “SP SETTING” on the main unit’s display.

•“SPEAKER DISTANCE” is shown as “SP DISTANCE” on the main unit’s display.

NOTICE—

•Items on the menus shown above are all set to the initial values when shipped from the factory.

*However, the SPEAKER DISTANCE, SUBWOOFER, and THX AUDIO SETUP submenu settings are not the initial ones. They are the settings when “SUBWOOFER” is set to “YES” on the SPEAKER SETTING submenu.

•Some of the menus or some items on the menu cannot be shown or cannot be adjusted. (For details, see the respective explanations in this section.)

29