OPERATIONS

To use this remote control system, you need to connect the TV to the MONITOR OUT jack (see page 14), and set the TV’s input mode to the proper position to which the receiver is connected.

Make sure you have connected the CD player or MD recorder equipped with the TEXT COMPU LINK remote control system. If not, you cannot use the following functions.

IMPORTANT:

•When using the remote control:

Check the indication shown on the remote’s display when you press a button—this indicates the remote control operation mode for a while.

DVD AUDIO

LEARN TRANSMIT

TV/DBS

VCR 1

LEARN TRANSMIT

Ex. When you press TEXT DISPLAY.

TEXT

SET

DISPLAY

 

EXIT

Text display operation buttons
1Source name: CD or MD2Select or , then press SET to change the disc.3 Track numbers and track titles.

•When you move to a track number, you can change the track information by pressing @ / #. Each time you press the button, track information alternates between its track title and

its performer. (You can also start playing the track by pressing SET.)4Select this (move in front), then press SET to go to theDISC SEARCH screen (see page 58).

5Select this (move in front), then press SET to go to the TITLE INPUT screen (see page 59).

6This appears only when a CD Text is selected.7Disc information such as the disc title, performer, music genre, etc.

When this is selected ( in front), you can change the disc information by pressing @ / #. Each time you press the button, disc information (see “Note on 7”) changes.

8Select or , then press SET to change the track.

9Usable buttons and their functions for the current selection. Indication here will change according to what is currently selected ( in front) on the screen. See “Note on 9.”

Note on 7:The following information will appear on the display:

•For CD Texts—Disc title, Performer, Genre, Song writer, Composer, Arranger, Message

Only recorded information will be shown. If there is no data, “NO DATA” will appear.

•For MDs—Disc titleIf there is no data, “NO DATA” will appear.Note on 9:

For example, the SET button will be used to start play (PLAY), to go to the next screen (ENTER), and to determine the selection (ENTER).

Showing the Disc Information on the TV ScreenPress TEXT DISPLAY while “CD” or “MD” is selected as the source.The Disc Information screen appears on the TV.

1

 

6

2

7

 

3

8

4

 

5

9

Disc Information screen
To exit from the Disc information screen

Press EXIT.

Notes:

•The on-screen display will disappear in the following cases:

–if no operation is done for about 10 minutes.

–if you do any operation other than explained in this section.

•To control the MD recorder using the TEXT COMPU LINK remote control system, you have to change the source name shown on the display from “TAPE” to “MD.” (See page 23.)

•Some special characters and marks cannot be displayed correctly.

57