Connections
Preparation
Do not turn on the power until you complete the connection.Standard setup
DVD player
| Speaker | Receiver | Speaker |
Connecting the antennas
Connecting the AM loop antenna (supplied)
| 1 Set up the AM loop antenna. | 3 Turn the AM loop antenna to find the best |
| position for radio reception. |
| Place the AM loop antenna as far from the |
| receiver as possible. |
| • Do not place the AM loop antenna on a metallic |
| table or close to a TV, computer, or other electric |
| appliances. Doing so may affect radio reception. |
| 7 When radio reception with the supplied AM |
| loop antenna is poor |
| 2 Connect the antenna cord. | Electric wire: 3 - 5 m (not supplied) |
Receiver
(rear panel)
WhiteBlack
| If insulation covers |
| the tips of the |
| Connect the ends of the | antenna cord, |
| antenna cord as shown | twist and pull off |
| above. | the insulation. |
Twist together electric wire andthe AM Electricloop wire antennacord.AM loop antenna cord
Receiver
(rear panel)
Stretch out the electric wire horizontally, preferably in a high place such as above a window or outdoors. Connect the AM loop antenna cord to the receiver together with the electric wire.
When positioning the antennas, find the best position for reception while listening to an actual radio program (refer to “Listening to radio broadcasts” (A page 18)).
7