For the locations of the remote control buttons, refer to page 28.
Adjusting the picture quality (VFP)
7When a disc is played back or paused
1 Slide the remote control mode selector to DVD.
2 Press VFP.
•The current setting will appear on the TV screen.•The “GAMMA” setting adjusts the brightness of neutral tints while maintaining the brightness of dark and bright portions.
•The “SHARPNESS” setting adjusts the screen sharpness.3 Press 2/3 (cursor) to select
VFP mode.
•Selecting “NORMAL” is suitable for normal usage, and selecting “CINEMA” is suitable for a dark room. When selecting “NORMAL” or “CINEMA”, proceed to step 8.
•Selecting “USER1” or “USER2” enables you to make detailed adjustment in step 4 and the later steps.
4 Press5// (cursor) to select an item to be adjusted.
5 Press ENTER.
Example: | TV screen |
| |
|
|
|
|
| GAMMA |
|
|
|
|
| |
|
|
|
|
6 Press 5//(cursor) to change the value.
7 Press ENTER.
• To adjust other items, go back to step 4.8 Press VFP.
NOTE
•If no operation is made for several seconds during the procedure, the settings made so far will be automatically stored.
•“VFP” stands for “Video Fine Processor”.
Playing back the bonus group
There are some DVD AUDIOs with a special group, called “bonus group”, recorded.
NOTE
•You can use this function when “BONUS” lights up in the display window on the DVD player.
7When a disc is played back
1 Slide the remote control mode selector to DVD.
2 Press GROUP/TITLE 
repeatedly to select a bonus group.
•“KEY_ _ _ _” appears on the TV screen, and in the display window on the DVD player.
3 Press the number buttons to enter the pin code (4 digits).
•The method of obtaining a pin code differs depending on the disc.4 Press ENTER.
•When the correct pin code is entered, “BONUS” disappears and the playback of the bonus group starts.
•If an incorrect pin code is entered, try entering the correct pin code again.Playing back DVDs/CDs
34