Using the AV COMPU LINK function

When a JVC-manufactured TV with AV COMPU LINK II or III terminals is connected to the DVD player using these terminals, operating either the TV or the DVD player controls the other equipment at the same time.

Connection and setup

NOTE

•“AV COMPU LINK” is printed for terminals on some JVC-manufactured TVs. These terminals are no different from the “AV COMPU LINK I/II” or “AV COMPU LINK” terminal.

•Refer to “OTHERS” (A page 39) for determining the “AV COMPULINK MODE” setting.

•Also refer to the manual of the TV to be connected to the DVD player.

AV

 

COMPU LINK

 

II or III

DVD player (rear panel)

 

JVC-manufactured TV

 

Connection cord

 

(not supplied)

 

Input terminal on the TV

“AV COMPULINK MODE”

 

setting

Video 1

DVD2

Video 2

DVD1

•Connect the video 3 (DVD) input terminal on the TV.

•If the video 3 input terminal is used for the playback of a digital video movie, this terminal does not work with the AV COMPU LINK function.

Operation

1 Turn on the main power of the TV.

2 Slide the remote control mode selector to DVD.

3 Press 0 OPEN/CLOSE.

• The disc tray ejects.

4 Place a disc.

5 Press 3 (play) or DVD.

•The power of the TV is turned on.

•The input mode on the TV changes to either the video 1 input or the video 3 (DVD) input.

45