For the locations of the remote control buttons, refer to page 20.
Pausing playback
7When a disc is played back
1 Slide the remote control mode selector to DVD.
2 Press 8.
•To return to normal playback, press 3 (play).Advancing the picture frame by frame
(only for moving image)7When a disc is paused1 Slide the remote control mode selector to DVD.
2 Press 8repeatedly.
Fast reverse/fast forward search
7When a disc is played back
1 Slide the remote control mode selector to DVD.
There are two methods in step 2.2 Press 1or ¡.
•Each time you press the button, the speed increases. To restore the normal speed, press 3(play).
Hold down PREVIOUS 4or NEXT¢.
•Fast reverse/fast forward search can be used only while the button is pressed.NOTE
•For some discs, sound is intermittent or no sound will be produced during fast reverse/fast forward search.
•The selectable speeds and displays vary by the disc type.Playing back DVDs/CDs
|
|
| Messages displayed on the TV when the power is turned on | |
|
| The following messages appear depending on the status of the DVD player. | ||
|
|
|
|
|
| NOW READING |
| Appears when the DVD player is reading the disc information. Wait for a while. | ||
|
|
| ||
| REGION CODE |
| Appears when the Region Code of the DVD does not match the code the DVD | ||
| ERROR! |
| player supports. (A page 47) | ||
| NO DISC |
| Appears when no disc is loaded. | ||
|
|
| ||
| OPEN |
| Appears when the disc tray is opening. | ||
|
|
| ||
| CLOSE |
| Appears when the disc tray is closing. | ||
|
|
| ||
| CANNOT PLAY THIS |
| Appears when an unplayable disc is attempted to be played back. | ||
| DISC |
|
| ||
|
|
|
|
|
24