Timer (continued)
Using the playback timer
Set the clock beforehand. (A page 15)1 Slide the remote control mode selector to
RECEIVER.
2 Press CLOCK/TIMER.
Display on the receiver
•If you accidentally pressed CLOCK/TIMER twice or more, press CLOCK/TIMER repeatedly until the display shown above is displayed.
3 Press SET.
4 Set the starting time and ending time with 2, 3(cursor), and then press SET.
Example:
Display on the receiver when setting the starting time to 8:45Display on the receiver when setting the ending time to 9:45•Press 2or 3 (cursor) to select the value and press SET to set the value.•You can use the number buttons instead of2 or 3 (cursor). Refer to “Using the number buttons” (A page 15).5 Press 2or 3(cursor) to select “ONCE” or “WEEKLY”, and then press SET.
| ONCE | The playback timer works once. |
| WEEKLY | The playback timer works |
| weekly or every day. |
6 Press 2or 3(cursor) to select the desired day of the week, and then press SET.
•Each time you press 2or 3 (cursor), the display changes as follows.When “ONCE” is selectedWhen “WEEKLY” is selected
(The playback timer works every day.)
(The playback timer | (The playback timer |
works Monday to | works Monday to |
Saturday.) | Friday.) |
7 Press 2or 3(cursor) to select the desired sound source, and then press SET.
•If you have selected “FM” or “AM” in this step, press 2, 3 (cursor) or the number buttons to select the preset number of the radio station whose broadcast you want to
listen to (Refer to “Using the number buttons” (A page 15)), and then press SET.
8 Press 2or 3(cursor) to adjust the playback volume, and then press SET.
•You can use the number buttons to specify the volume.•The settings will appear in the display window on the receiver.43